Motion dynamics speed control wiring

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

mattieharding

Well-Known Member
Joined
25/3/07
Messages
80
Reaction score
0
Hey guys cant find my wiring diagram and just wondering if anyone has the sc2+ board so i can wire mine up

Cheers
 

Beersuit

Well-Known Member
Joined
17/3/12
Messages
382
Reaction score
204
Location
Toowoomba
That's all I went off.

If you have bought the power supply linked in that post there is a pink screw adjuster next to the power light. Turn it clockwise. I was scratching my head for a few hours till I called and was guided to it.
 

#bewlife

Member
Joined
28/9/18
Messages
5
Reaction score
1
Location
Brisbane
Don’t buy the potentiometer. Mine fried in the second use with the RPM on about 50% for 3 minutes. If it can’t deal with that they shouldn’t sell a speed controller with it.

The motor is good but you can get it much cheaper on eBay. Zero customer service post purchase, no reply to emails.

Spend your money elsewhere!
 

kadmium

Well-Known Member
Joined
12/3/07
Messages
1,000
Reaction score
680
Don’t buy the potentiometer. Mine fried in the second use with the RPM on about 50% for 3 minutes. If it can’t deal with that they shouldn’t sell a speed controller with it.

The motor is good but you can get it much cheaper on eBay. Zero customer service post purchase, no reply to emails.

Spend your money elsewhere!
I think if theirs hasn't gone in the last 7 years they should be ok :D
 

Crusty

Well-Known Member
Joined
29/6/08
Messages
2,623
Reaction score
607
Location
Gulmarrad, NSW
Don’t buy the potentiometer. Mine fried in the second use with the RPM on about 50% for 3 minutes. If it can’t deal with that they shouldn’t sell a speed controller with it.

The motor is good but you can get it much cheaper on eBay. Zero customer service post purchase, no reply to emails.

Spend your money elsewhere!

Exactly the experience I had with them as well. My board didn't even work. Rang 4 times, emailed three & spoke to the bonehead that owns it but he denied he was the boss. Like above, go elsewhere, ******* useless.
 

Ballaratguy

Well-Known Member
Joined
21/6/17
Messages
319
Reaction score
94
I’ve got a 12v motor with control box & speed control $200 if anyone interested
image.jpg
image.jpg
 

Latest posts

Top