Mixing ingredients - best practice?

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jpd1009

Member
Joined
13/2/22
Messages
9
Reaction score
0
Location
Thornbury
Hi,

I have made a few coopers recipes, fermenting in a S/S keg king conical fermentor.

The ingredients always consist of the syrup concentrate, dry ingredients, i.e. dextrose, dry malt, etc, and water.

I have always struggled to get my head around just dumping the ingredients into the fermentor then giving it a stir. Doing this the syrup will never really mix through as it will head to the bottom and into the outlet pipe and sit undisturbed.
In addition that dry ingredients with all the lumps!

I have been been mixing everything together in a regular pot to insure no lumps and all the water & syrup us mixed. Then transfer into the fermentor.

I would love to dump it all in the fermentor.

Looking for some assurances :) or some tips.

Thanks in advance.
 
What's the temperature of the liquid in the fermenter?
 
In a flat bottomed fermenter, I'd say just dump it all in and stir. Your problem is going to be getting any sort of agitation/mixing going in the cone section.

I'd just keep doing what you're doing. It's only one extra pot to wash, and large pots are fairly easy to clean, especially as you aren't cooking anything in it, just mixing so there's no risk of burnt bit sticking to the sides/bottom.
 
I add hot water to the liquid malt extract to dissolve it, then add the other ingredients, then top up with cold water to the required volume, then stir like crazy and pitch the yeast. Never had a problem with the ingredients not mixing properly.
 

Latest posts

Back
Top