Massive brewery sale - SS Brewtech, PID, HERMS, Mash tun, kegs etc

[Khellendros13]

Hi everyone,

I am selling off all my brew gear. Struggling for time mixed with other priorities.

I have photos of everything taken today, just ask if you need more details.
Everything is sold as-is.

I can post, but buyer covers all postage costs and I can only post on weekends.
Express post with signature and tracking is preferred shipping method.

I am located in Sydenham VIC 3037 and pickup can be after 7pm weeknights or arranged for weekends.

Photo album link:
https://photos.app.goo.gl/7LegPJMiWE6hbsaP2



3x Pepsi Corny kegs. The 2 on the left will come with a free keg seal kit. The 3rd holds pressure perfectly fine. May contain residual PBW or beer.
$40 each - pickup only SOLD TO GRUMPYPAUL pending pickup

SS Brewtech 7 Gallon Conical Fermenter. Includes pressure transfer/blow off. Needs 1 replacement seal for pickup tube.
$425 - pickup only - SOLD TO Stubbie pending pickup

SS Brewtech FTSS chill system for above 7 Gallon Fermentor + Neoprene jacket
$200

70L Aluminium Kettle, Chef Innox brand with sandwich bottom. Includes all connections as per photos. Uses camlocks. 3piece valve on camlock for easy disassembly and cleaning.
$70 - pickup only

10 Gal/38L Cooler Mashtun with thermometer, camlocks and 3piece valve. Includes false bottom and auto sparge with floating ball for the inlet tubing as pictured.
$80 - pickup only

Red Lion PXU20020 PID control box for HERMS - Custom built with SS relay. Red Lion PID is a big step up from the $10 ebay PID. This PID is $170 new alone.
$120 SOLD to DJ_L3ThAL pending pickup

HERM IT complete HERMS - includes HERMS coil, SS enclosure with mounting brackets, 2.4kw element and wired to connect to above PID. Heating rate is around .8c/30seconds for a full mash around 30-35L. All camlocks and valves pictured included.
$200 SOLD to DJ_L3ThAL pending pickup

Keg King Magnetic Drive pump with camlocks and valves. Wired to plug into above PID. Come with SS head and original plastic head.
$40 SOLD to DJ_L3ThAL pending pickup

Perlick 650SS taps with what I think is brass shank. Will be given a quick courtesy clean before shipping/pickup.
$70 each - 1 SOLD to Beerandpies pending payment


Keg King Maltmuncher 2 roller Grain Mill. Just needs a screw for the handle, I will find one before posting/pickup. I have been using an electric drill to crush with.
$50 - pickup only SOLD to coxy pending pickup

Keg King MKIII 30 plate chiller - Inc tubing and tap water has only ever been ran through the left side. Cleaned with PBW after brewing.
$50 - SOLD to Stubbie pending pickup

Micromatic Regulator - $50 SOLD to Batz pending pickup/payment

Keg King 2.6L CO2 bottle - Date stamped 2016
$90 - pickup only

Digital Stir Plate with 2 stirbars and power supply. Variable speed.
$70

3L Flask.
$10 - pickup only SOLD to coxy pending pickup

½ inch Hardware, single prices

SS T Piece - $2 SOLD to Digga pending pickup/payment

Nut - 50c 2x SOLD to coxy pending pickup
Nut+ recessed rubber washer - $1
End plug - 50c
2inch joiner - $1
Elbow - $1
Pickup tube - $5
Ball valve - $5 SOLD to Digga pending pickup/payment
Thermowell - $5 SOLD to Digga pending pickup/payment
Threaded length with barbed end - $2
External Threaded barb - $1
Internal threaded barb - $1
Washers - 50c
1inch threaded piece with nut - $1
20mm holesaw for SS - $10
22mm holesaw for SS - $10
Refractometer - $20
9x CO2 canisters - $1 each SOLD to Digga pending pickup/payment

5L jug - $5

Hop Spider Mesh Strainer - for Boil Kettle
$10

Carbonation Lid for Corny Keg. Just needs new tubing.
$10 SOLD to Digga pending pickup/payment

Plastic Mash Paddle - Free pickup only SOLD to coxy pending pickup

Short Copper pickup tube - $5

Gelatine Finings - $5

1kg DME - $5 SOLD to coxy pending pickup

Alu Scoop - $5

Assorted Keg tubing - Free with any purchase over $10, first in first serve SOLD to Digga pending pickup/payment

Assorted Keg related items

Intertap with SS shank - $40
SS Shank - $10 SOLD to Digga pending pickup/payment
John Guest fittings - $1 each
Keg OUT fitting with JG connector - $3 SOLD to Digga pending pickup/payment
Keg Lube - $1 SOLD to Digga pending pickup/payment
Thread Tape - 50c
Keg King Thermometer - $5
Glass Sight Gauge with Thermometer - $10
Collet Spanner - $5
Copper Tubing - $1
Blackboard Tap Handle - $1 (requires drilling for the hole to screw onto tap, and light sanding) SOLD to Digga pending pickup/payment

Calcium Sulphate - $10 includes container
Calcium Chloride - $10 includes container
Lactic Acid - $5 (¾ full)
Calcium Carbonate - $5

Barbed Female Camlocks - $5 each (may only be 3 or 4 available, ask first)

Aerator/Cleaner attachment for drill - works well. $10

SS Drip Tray - $10 needs a minor clean.

STC temp control - $30 SOLD to Gregos pending payment


Cheers,

Aaron

 

[DJ_L3ThAL]

Interested in Pid/herms/pump. Will PM in a couple hours about to play basketball

 

[Stubbie]

Interested in the chiller

 

[GrumpyPaul]

sending Pm re kegs.

 

[Pondo]

PM'd re: Stirplate

 

[Maheel]

Interested in Pid/herms/pump. Will PM in a couple hours about to play basketball

2nds if does not happen

i am also interested in herms / pump but not PID

pack and postage to BNE

 

[Khellendros13]

PM'd re: Stirplate

No PM received yet.

2nds if does not happen

i am also interested in herms / pump but not PID

pack and postage to BNE

No problem, I'll see how the deal with DJ Lethal goes first.

Interested in Pid/herms/pump. Will PM in a couple hours about to play basketball

No worries, I'll check tonight.

 

[Rosey6]

Nil for kegs if falls through

 

[Coxy]

Sending PM re: mill, flask and mash paddle.

 

[Batz]

I'll take the regulator.

 

[FarsideOfCrazy]

Pump please if not gone.

 

[Nullnvoid]

Pump as well if all the others have tragic accidents

 

[Beerandpies]

Interested in One perlick tap if you can post to 2541.

 

[Khellendros13]

Thanks everyone, I'll get back to you all with replies in the next hour or so.

 

[Digga]

Interested in the side T piece carb lid, thermowel, ball valve some keg tube, keg lube black board tap handle and jeg out fitting with JG.

Need pictures of SS shank, JG fittings 9x co2 canisters.

Thanks Luke

 

[DJ_L3ThAL]

I'll take the regulator.

I have this same regulator and can most DEFINITELY recommend it, absolutely spot on no creep and a well built unit.

 

[Gregos]

STC Temp Control Please

 

[Khellendros13]

2nds if does not happen

i am also interested in herms / pump but not PID

pack and postage to BNE

Noted, but working out details with DJ Lethal.

Nil for kegs if falls through

Noted.

Sending PM re: mill, flask and mash paddle.

Replied, updated OP.

Cheers

I'll take the regulator.

Replied, updated OP.

Cheers

Interested in One perlick tap if you can post to 2541.

Replied, updated OP.

Cheers

Interested in the side T piece carb lid, thermowel, ball valve some keg tube, keg lube black board tap handle and jeg out fitting with JG.

Need pictures of SS shank, JG fittings 9x co2 canisters.

Thanks Luke

Replied, updated OP.

Photos:
https://photos.google.com/share/AF1...?key=c3FNTk1UOHhBSUZ6WUxOQ1ZILXVpR3h3TGV3TVVB

https://photos.google.com/share/AF1...?key=c3FNTk1UOHhBSUZ6WUxOQ1ZILXVpR3h3TGV3TVVB

https://photos.google.com/share/AF1...?key=c3FNTk1UOHhBSUZ6WUxOQ1ZILXVpR3h3TGV3TVVB

https://photos.google.com/share/AF1...?key=c3FNTk1UOHhBSUZ6WUxOQ1ZILXVpR3h3TGV3TVVB

The shank will come with one of the brass nuts in the photo.

STC Temp Control Please

Replied, updated OP.

Cheers

 

[Khellendros13]

Stirplate back up for sale.

 

[Bretta]

I'll take the drip tray please