MashMaster MiniMill

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Crusty

Well-Known Member
Joined
29/6/08
Messages
2,625
Reaction score
607
Location
Gulmarrad, NSW
Hi guys.
I haven't brewed for about 18 months & trying to crack my grain today & have struck a major problem with my mill. Even at the smallest width adjustment, The grain wont crack, still whole & no broken husk. It's not feeding through well either. I've tried the fluted roller on one side but still no joy. I'm bloody baffled. I've pulled it apart a few times but it's always worked flawlessly.
Anyone shine some light on this.
Mill is about 5yrs old, maybe rollers are stuffed?
Cheers
 
Make sure you're turning it the correct way.

And the FUCKWIT award goes to me!
The last time I pulled the mill apart, I took the hopper off as well & when I put it back together, I put the hopper on the mill but inadvertently put it on the bottom of the mill instead of the top so in fact the rollers were in reverse ejecting the grain instead of feeding it into the rollers. I've only been all grain brewing since 2008 so you'd think I would of picked that up. What a *********.
Thanks guys.
 
Back
Top