Help Support Aussie Homebrewer by donating:

MashMaster fluted mill and HD drill complete setup Brisbane

Discussion in 'Buy and Sell' started by Smokomark, 30/11/18.

 

  1. Smokomark

    Well-Known Member

    Joined:
    30/9/11
    Messages:
    521
    Likes Received:
    93
    Gender:
    Male
    Posted 30/11/18
    Mash Master twin fluted stainless geared roller mill. comes set up ready to use with hi torque, low speed drill. 0-500 rpm 1050w 13mm keyless chuck. Very little use.
    Original perspex hopper and 30lt fermenter with funnel - holds approx 15kg of grain. Crushed grain drops into 55lt esky

    $300 ono located inThornlands,


    MillMaster MiniMill Specifications

    130mm (5"approx.) precision machined rollers
    39mm (1 1/2") diameter rollers
    26 flutes per roller
    420 Hardened Stainless Steel Rollers as Standard high corrosion and wear resistance
    12.7mm (1/2") drive shaft keyed for easy motorization, drill drive or hand crank
    additional 3 flat triangular shank drive shaft designed to fit a 3/8ths drill chuck for improved torque and centering.
    oil-impregnated sintered bronze bushings, carry a higher load, need less maintenance, and damp vibration better than their rolling-bearing counterparts.
    Strong aluminum frame IMG_20181104_160623.jpg IMG_20181104_160642.jpg
     
  2. Smokomark

    Well-Known Member

    Joined:
    30/9/11
    Messages:
    521
    Likes Received:
    93
    Gender:
    Male
    Posted 8/12/18
    Price reduced NOW $250
     
  3. Maheel

    Well-Known Member

    Joined:
    19/1/10
    Messages:
    1,875
    Likes Received:
    166
    Posted 9/12/18 at 12:44 AM
    upgrading Mark ?

    I have a gen 1 no flutes MM mill :(

    this is a bargain, maybe i should buy it and re-sell mine !!
     
    Smokomark likes this.
  4. altone

    Well-Known Member

    Joined:
    4/6/09
    Messages:
    908
    Likes Received:
    214
    Gender:
    Male
    Occupation:
    Kept man
    Location:
    Melbourne's East
    Posted 9/12/18 at 2:03 AM
    I don't need a mill but if it was in Melbourne and I hadn't spent all my money on fixing and moving house I'd buy it for sure.
     
    Smokomark likes this.
  5. Smokomark

    Well-Known Member

    Joined:
    30/9/11
    Messages:
    521
    Likes Received:
    93
    Gender:
    Male
    Posted 9/12/18 at 2:29 AM
    I've had another mill for well over a year now, that I got with a heap of other stuff. It's a big arse monster mill with motion dynamics motor and a huge all steel hopper that holds 15kg plus. Don't really need two Mills.
     
  6. Bbowzky1

    Well-Known Member

    Joined:
    5/5/15
    Messages:
    186
    Likes Received:
    25
    Posted 11/12/18 at 12:31 AM
    Sounds like I need something like your big mill.
    Mashing 40-60kg at a time with 5kg hopper does ya head in.

    Is it still just a mash master fluted mill with motion dynamic controller and bigger custom hopper? This is what I was considering doing?

    Cheers
     

Share This Page