Quantcast

March Mag Drive Pumps

Aussie Home Brewer

Help Support Aussie Home Brewer:

Justin

Well-Known Member
Joined
4/11/03
Messages
1,517
Reaction score
14
Just tying up the thread from the other day on March pumps (under a different topic heading, sorry Fiscus). The one I was talking about was purchased by a mate for a HERMS/RIMS system from Process Pumps (www.processpumps.com.au)
This was the quote on it.

>>>The model we normally sell to the home brewers is a March
magnetic drive
centrifugal pump model: 809 HS PL

Rated to 121 deg c
Voltage 240 volt single phase
Connections are 1/2" inlet and outlet
Max flow rate 21 lpm
Max head capability 2.7 metres

Cost: $247.50 each including GST

Freight cost: $16.50 including GST

Availability: We have 3 units ex stock in Melbourne

Payment is accepted by cheque, Bankcard, Visa or Mastercard
<<<<

Although availability would be down by one now!

Hope it helps.

JD
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
Thanks Justin,
Just what I want and the Xmas bank account does not
 

JasonY

The Imperial Metric Brewery
Joined
12/9/03
Messages
1,490
Reaction score
1
Hmmmm will be a while before I venture into the world of mag drive pumps .... anyone ever tried a dishwasher pump? Those suckers must be rated for a fair temperature.
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
Same as washing machine pumps i would recond , I got one of those now
 

GMK

BrewInn Barossa:~ Home to GMKenterprises ~
Joined
18/12/02
Messages
3,699
Reaction score
11
Pumps

I bought a fountain pump as recomended by brew guru Graeme Sanders - 64.00...

It is an italian brand.....Grumpy Thomas put me onto it...
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
Are you happy with it GMK?
Have seen Sanders on the site , did you buy the same model as his ?
 

GMK

BrewInn Barossa:~ Home to GMKenterprises ~
Joined
18/12/02
Messages
3,699
Reaction score
11
Batz said:
Are you happy with it GMK?
Have seen Sanders on the site , did you buy the same model as his ?
Batz,

I bought the same model....

Have not had the chance to play with it yet.....

Will do when I get the AG Setup.
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
Justin
Thanks for the pump info mate , had a few IPA's today and ordered one , man I am gunna be in the shit !!
Gotta spare room for a fellow brewer big d ? :( :blink: :unsure:
 

big d

Hopaholic
Joined
3/6/03
Messages
3,449
Reaction score
3
only if you bring some full kegs batz. :chug:
you may have to hit the o/t trail to keep her indoors happy :D

yep 04 is gonna be mighty expensive on my mark 2 brewery with pumps,counterflow chillers and a few other things im thinking about. :blink:
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
Used my boiler big time today big d , wort chiller brought the temp. down to the water temp. fairly quickly , still way to high , had to use some ice as the esky set up is not (set up)
Want a washing pump? Wired and with 1/2' out and inlets?
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
okey dokey
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
Hey
It is a secondhand jobby
 

Justin

Well-Known Member
Joined
4/11/03
Messages
1,517
Reaction score
14
Hey Batz, did you get the 809 HS PL model? Apparently, after reading various things on the Yank website, this pump is the "go" for homebrewing. I think you should be very happy with it. Look at it this way, you were going to buy it anyway so you might as well buy it now and get the most use out of it (this is how I've justified my Barely Crusher ;) . Apparently you can also get a brass one but it's dearer and in my opinion probably unnecesary (??). My mate is building a RIMS system with his, also building the controller for it from scratch. Pretty impressive actually. Just taught himself all the programming and building knowledge off the net.

Got some more hop cuttings last night. I now have 3 POR, 4 (cuttings) of Tettnanger, 4 (cuttings) of Hallertau. Beer, Beer and more beer. :chug:

JD
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
That's the one I ordered Justin , will power my RIMS as well
 

jayse

Black Label Society
Joined
25/7/03
Messages
3,402
Reaction score
10
your system is sounding great batz.
I want one of those pumps one day for sure, not that my pumps don't do the job well. Your gunna have one of the best systems here before you even ark it up for the first time.

cheers, jealous of Batz new pump, Jayse
 

Batz

Batz Brewery...Hand crafted beers from the 'Batcav
Joined
8/8/03
Messages
12,728
Reaction score
1,415
If I make it through the delivery alive , then I'll let you know what it's like
:ph34r:
 

Justin

Well-Known Member
Joined
4/11/03
Messages
1,517
Reaction score
14
This is Batz peeking through the mail slot in his front door :unsure: :ph34r: :unsure: :ph34r:

Watching for the Wife and the delivery man, hoping and praying that the gods would not be so cruel as to allow them to arrive home at exactly the same time.

just playing Batz. Your a bold man.

JD
 

Murray

Beer bear.
Joined
24/9/03
Messages
749
Reaction score
3
You had best sacrifice a glass to the ale gods, Batz.
 

JasonY

The Imperial Metric Brewery
Joined
12/9/03
Messages
1,490
Reaction score
1
Batz, you could sabotage your washing machine a few days before it arrives and then claim it is just a new pump for the washing machine :)

Slim chance of it passing but ya never know. :p
 

Latest posts

Top