Goose 0 Warning Points Joined 6/7/05 Messages 634 Reaction score 146 21/3/15 #1 Have a minor gas leak on my liquid post, this after 5 minutes at 30 psi with soapy water, small, but enough to waste CO2... Changed head and o ring under liquid out tube seating. Any suggestions other than replacing the whole keg ?
Have a minor gas leak on my liquid post, this after 5 minutes at 30 psi with soapy water, small, but enough to waste CO2... Changed head and o ring under liquid out tube seating. Any suggestions other than replacing the whole keg ?
roastinrich Well-Known Member Joined 3/9/11 Messages 230 Reaction score 101 Location Northwest 21/3/15 #2 Can you get any teflon tape on the thread?
Cervantes Well-Known Member Joined 16/2/14 Messages 431 Reaction score 119 Location Cervantes, WA 21/3/15 #3 + 1 for thread tape
Goose 0 Warning Points Joined 6/7/05 Messages 634 Reaction score 146 21/3/15 #4 thanks lads, but I thought o'rings negated the need for tape however I will give that a try... cheers
thanks lads, but I thought o'rings negated the need for tape however I will give that a try... cheers
DU99 Well-Known Member Joined 7/6/10 Messages 6,938 Reaction score 1,115 Location Deer Park.Victoria 21/3/15 #5 thread sealant
Eagleburger Well-Known Member Joined 6/2/14 Messages 493 Reaction score 119 21/3/15 #6 Have a look at the oring seat surfaces.