Line Length For Kegging

[Bobby]

Finished uni for the semester so time to get started on my keg setup.
I have been reading shitloads about it but still have no idea how much beer line to use???
I have 4mm line and the fridge is at around 1C. can anyone help???

Cheers.

 

[GOLIATH]

You will require 1.5 Metres of 4mm minimum 1 metre and pour from head pressure of about 10 PSI.

Regards
Dave

 

[GMK]

i use 4mm beer line and 5m per tap...

 

[Bobby]

1.5m at 12PSI works a treat. cheers.

 

[Justin]

Why not add my own measurements.

Serving pressure 100kPa. Line length 2m of 4mm BEVA line. Serving temp 5-6C.

Why not use your own calculations. Use this info here:

View attachment Draft_Beer_Balance_Reference.doc

 

[Justin]

And this one:

View attachment PressureTemp_CO2_volume.doc

 

[Trough Lolly]

What's 4mm in the old measure?? 3/16ths?
TL

 

[Justin]

:unsure: :blink: :unsure: :huh: :blink: :unsure:

Ummmm. About that?

I think 3/16" is about 4.7mm. So it's a bit smaller than 3/16"