• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Kegs taps and other goodies - QLD gold coast

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rle

Well-Known Member
Joined
4/1/18
Messages
93
Reaction score
5
I have for sale a bunch of stuff which i don't need. preferred pickup but will post if buy pays postage i'm on the gold coast in southport
no reasonable offer refused

3 x 20l cornie kegs (one not pictured) $90 new seals
1 19l cornie keg $70 new seals
1 10l cornie keg new seals $50
andale cold plate $125
all taps $50
coupler are $75
font 150
stainless coils 100 each think they are 10mm diameter not sure on length about 30 cm short side and 650 long side...

IMG_20180102_120725.jpg

IMG_20180102_120725.jpg

IMG_20180102_120826.jpg

IMG_20180102_120907.jpg

IMG_20180102_120920.jpg

IMG_20180102_120931.jpg

IMG_20180102_120952.jpg

IMG_20180102_120959.jpg

IMG_20180102_121022.jpg

IMG_20180102_121109.jpg

IMG_20180102_121131.jpg

IMG_20180102_121153.jpg

IMG_20180102_121221.jpg

IMG_20180102_121242.jpg

IMG_20180102_121301.jpg

IMG_20180102_121302.jpg

IMG_20180102_121324.jpg

IMG_20180102_121344.jpg

IMG_20180102_121410.jpg

IMG_20180102_121414.jpg
 
Last edited:
the rest of the stuff
couplers are $75

IMG_20180102_122255.jpg

IMG_20180102_122316.jpg

IMG_20180102_122320.jpg

IMG_20180102_122326.jpg

IMG_20180102_122411.jpg

IMG_20180102_122917.jpg

IMG_20180102_122921.jpg

IMG_20180102_122933.jpg

IMG_20180102_122937.jpg

IMG_20180102_123003.jpg

IMG_20180102_123007.jpg
 
Ok. What diameter and length are the stainless coils? How much are you after for those?
 
stainless coils 100 each think they are 10mm diameter not sure on length about 30 cm short side and 650 long side
 
I’d be keen on Vb tap and decal will that fit in andale font snaplock font as taps I’ve used before don’t have that bit on the front will pay for postage to melb
 
I’d be keen on Vb tap and decal will that fit in andale font snaplock font as taps I’ve used before don’t have that bit on the front will pay for postage to melb
sweet... sent you a message please send me your phone number
 
Rle, can you tell me what make the brass Murphy’s tap is please.
It’s similar to some I have but haven’t been able to correctly identify them for parts for a rebuild.
Cheers...spog.
 
Hey guys, after a bit of feed back I'm dropping the prices on everything pictured

30 for 10l keg
60 for 20l kegs
50 for 19l keg
70 for 40l cornie keg

All taps $30
Cold plate is $95
Font 80
Couplers 50 each
Coils 50 each

Decals 5 each

Single fonts 80 each with taps and decals
 
Yob was chasing some tap decals I believe...
 
Still got most of this for sale open to offers
 
Rle, can you tell me what make the brass Murphy’s tap is please.
It’s similar to some I have but haven’t been able to correctly identify them for parts for a rebuild.
Cheers...spog.
It looks like an Alumasc tap to me.
 
IMG_20180102_121709.jpg

IMG_20180102_121723.jpg


http://mengan.com.au/sale/
IMG_20180102_122156.jpg


IMG_20180102_122251.jpg

Would like to package up the bundy tap, quick connect in last pic and the black disconnect in the back of the middle image. Please PM with a price with postage to Newcastle NSW.

Cheers Digga
 
Last edited:
IMG_20180102_122204.jpg



This is the pic I hope with the disconnect in the back ground.
 
Sold that Bundy tap... Are you after some quick connects for the taps on the font or for the couplers
 

Latest posts

Back
Top