KegMaster double tap upgrade to Triple Tap

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ricey79

New Member
Joined
2/11/18
Messages
2
Reaction score
0
Location
Joondalup
Just bought a double tap Kegerator and thinking I need to upgrade it to 3 taps
I havent even gotten around to building the fridge but was thinking I could just buy a third tap and drill a third hole in the faucet, has anyone else done this?
Cant see it being an issue but cant find any posts on it
 
This will work. I would use a stepped drill bit, easily the best tool for cutting larger holes in stainless.

You could also just replace the font if you dont already have the tool to drill the hole and cant be stuffed muckign around with it. They are about $35 I think.
 
i drilled mine, works fine with glass under middle tap. just use a pin punch and pilot drill the hole, i made a thread on here about adding an extra tap this year, search for that for measurements.
 
Ive seen these font extensions on the net but can't justify the price. Cheaper to just upgrade to a 3 tap font or drill another hole.
Screenshot_20181129-095158_Samsung%20Internet.jpeg
 
Back
Top