Gday Everyone...
Im new to kegging, but not to home brewing and have a little problem...
Whenever I pour a beer from my chilled keg (I'm using about 8psi serving pressure), the first runnings through the beer line splatters into the glass, causing excess foam... If i discard the first 50ml, the rest of the beer puts perfectly and has perfect head. With the splatter I end up with about an inch of head or more in a pint glass.
It splatters like theirs air in the line for about 2-3 seconds, then pours great.
Nots sure what the problem is, but would appreciate any advice!
Im new to kegging, but not to home brewing and have a little problem...
Whenever I pour a beer from my chilled keg (I'm using about 8psi serving pressure), the first runnings through the beer line splatters into the glass, causing excess foam... If i discard the first 50ml, the rest of the beer puts perfectly and has perfect head. With the splatter I end up with about an inch of head or more in a pint glass.
It splatters like theirs air in the line for about 2-3 seconds, then pours great.
Nots sure what the problem is, but would appreciate any advice!