The compressor is more powerful, the unit comes with an integrated internal air circulation fan, more robust guard rail, stainless steel top, more space inside the fridge and is actually more compact so customers will be able to build them underneath the bench top more easily. We have also made the digital controls more reliable and more robust plus included some flash memory so if you have a power outage the temperature does not reset, it will remember the previous set point.
I was hoping one of the local brewers may have some inside info on how they are going and when they are likely to come on the market. I've been chasing this since last year and putting off getting one.
Assuming these are the same as the craftbrewer ones, what is the diameter of the hole in the top and how much space is there between the top of the kegs and the ceiling of the kegerator?
I have a flooded cobra font that I would want to use but it will more than likely extend into the fridge?
I have a gas manifold on mine although it's not a series 4. What I did was remove the plastic insert from the hole at the back where the gas lines go in, which made the hole bigger. This allowed me to mount the manifold on the outside of the unit and run all three lines through the hole into the kegs inside. I also just used double sided tape to stick it on, it's good strong stuff, probably similar to the auto repair tape.