• We have implemented the ability to gift someone a Supporting Membership now! When you access the Upgrade page there is now a 'Gift' button. Once you click that you can enter a username to gift an account Upgrade to. Great way to help support this forum plus give some kudos to anyone who has helped you.

Keg King Conversation- Back On AHB

Aussie Home Brewer

Help Support Aussie Home Brewer:

Fro-Daddy

Well-Known Member
Joined
23/4/17
Messages
335
Reaction score
90
Location
Brisbane, QLD

Turns out a 35mm piece of timber aligns them pretty damn well.
I ended up with the drill directly on to the shaft.
 
Last edited:

Cian Doyle

Well-Known Member
Joined
3/2/19
Messages
87
Reaction score
27
Location
Canberra
What is the digiboil alternative?
I got mine yesterday, it is a Robobrew with control panel/screen removed so now is a 2 element boiler, I also got the still gear with it going to have a go at some spirits.
 

sherwicf

Member
Joined
3/2/16
Messages
8
Reaction score
1
Would you guys have any insterest in developing a product like the hopstopper 2.0

$95US plus shippign a bit rich for my blood. Just a thought.
 

Reg Holt

Pro
Pro
Joined
29/1/19
Messages
267
Reaction score
151
Location
Brisbane
I got mine yesterday, it is a Robobrew with control panel/screen removed so now is a 2 element boiler, I also got the still gear with it going to have a go at some spirits.
Any pics mate? Which Robobrew is it?
 

CEO Keg King

Well-Known Member
Joined
13/8/19
Messages
289
Reaction score
212
Location
Melbourne
Would you guys have any insterest in developing a product like the hopstopper 2.0 $95US plus shippign a bit rich for my blood. Just a thought.
Would you guys have any insterest in developing a product like the hopstopper 2.0 $95US plus shippign a bit rich for my blood. Just a thought.
We can have a look at this but we will not just be copying someone else's product. Question is how many people are likely to buy something like this.
 

Gollywog

Active Member
Joined
6/9/17
Messages
30
Reaction score
13
The tap Cooler counter pressure bottle filler. Will you be getting any of these in soon? You've been out of stock for like 6 months now. I want to get this, and their counter pressure canning attachment.

Looks like even the company in Norway has none at the moment. So my question becomes, do you have any ordered? Or should i get it shipped from another country.
 

CEO Keg King

Well-Known Member
Joined
13/8/19
Messages
289
Reaction score
212
Location
Melbourne
The tap Cooler counter pressure bottle filler. Will you be getting any of these in soon? You've been out of stock for like 6 months now. I want to get this, and their counter pressure canning attachment.

Looks like even the company in Norway has none at the moment. So my question becomes, do you have any ordered? Or should i get it shipped from another country.
These are I believe on the way by air with TNT and so hopefully not much longer to wait. Agree that its been too long but this was due to the Norway end I am afraid.
 

Gollywog

Active Member
Joined
6/9/17
Messages
30
Reaction score
13
These are I believe on the way by air with TNT and so hopefully not much longer to wait. Agree that its been too long but this was due to the Norway end I am afraid.
Thank you so much. I've set up the email reminder so i can snap one up right away.
Does this include the can counter pressure kit as well by any chance?
 

CEO Keg King

Well-Known Member
Joined
13/8/19
Messages
289
Reaction score
212
Location
Melbourne
Thank you so much. I've set up the email reminder so i can snap one up right away.
Does this include the can counter pressure kit as well by any chance?
Hopefully not very long. Lots of people chasing this one. No can fillers though.
 

Meddo

Well-Known Member
Joined
30/1/16
Messages
640
Reaction score
282
Location
Brisbane
Hey @Keg King / @CEO Keg King, is there any way to bore out or otherwise modify the gas side of an A-type keg coupler to allow a higher outflow in a keg washer system?
 

Keg King

AHB Sponsor
AHB Sponsor
Joined
2/6/15
Messages
75
Reaction score
69
Location
Melbourne
Looks like you could try to. The gas side has that 2mm all around shelf at the base towards the center of the coupler. Would have to take apart the coupler to drill it of course. This would give you an ID as wide as the current top end of the gas port. Would not recommend trying to widen more than that.
 

Meddo

Well-Known Member
Joined
30/1/16
Messages
640
Reaction score
282
Location
Brisbane
Looks like you could try to. The gas side has that 2mm all around shelf at the base towards the center of the coupler. Would have to take apart the coupler to drill it of course. This would give you an ID as wide as the current top end of the gas port. Would not recommend trying to widen more than that.
That's kinda what I was thinking, put a heap of notches in that shelf with an angle grinder. Thought I might be able to drill a bit more out of the gas port as well but I'm not sure if that's actually a restriction point anyway.
 

Cian Doyle

Well-Known Member
Joined
3/2/19
Messages
87
Reaction score
27
Location
Canberra
Any pics mate? Which Robobrew is it?
Its the Robobrew 1, had a good look under the bonnet, nice neat job whoever is removing the circuit board and screen. The probe wire is still in tact, some enterprising folk could buy it with a pump and use an Inkbird temperature controller and have a cheap all in one vessel, the grain baskets and cooling coil are an extra. Good value for money whatever the use is for.
003.JPG
 

Ian Mackenzie

Pro
Pro
Joined
24/7/19
Messages
11
Reaction score
1
Location
Maitland NSW
Its the Robobrew 1, had a good look under the bonnet, nice neat job whoever is removing the circuit board and screen. The probe wire is still in tact, some enterprising folk could buy it with a pump and use an Inkbird temperature controller and have a cheap all in one vessel, the grain baskets and cooling coil are an extra. Good value for money whatever the use is for.
View attachment 118315
I must have been lucky . Mine came on Wednesday and contained the Grain basket.
 
2

Latest posts

Top