Keezer - ten tap bandit

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bronson

Well-Known Member
Joined
1/2/13
Messages
88
Reaction score
82
Happy fathers day to me.
Picked up this chest freezer new for $490. It will fit 8 cornys and 2 halfys. So im going to make a ten tap job. Cant wait to get started. Im still sorting out hardware ect but keen to work out my design. Ill still have to raise the lid but im thinking of wrapping the finished unit in dybond (aluminum composite panel). Should look great when im finished. Stay tuned.[emoji16]
e665082a3f9277ba346a784236a69d9d.jpg
 
Came home to find a bunch of these. 8 to be exact. I only payed for the yesterday and the wife said they arrived @8am , cant complain about that. Ive decided to down size to 8 taps at the moment as i only have 7 kegs. Always room for expansion though[emoji6]. I was originally thinking perilicks put they add up pretty quickly when your getting a few.
963ab25b68c173b17f479eed113eaedf.jpg
 
Thanks lads . Ive ordered my gloss black alucabond to wrap around . Hopefully will have it by the weekend
 
Just came home to some more goodies. Im going to get stuck in on the weekend.
e9bfa0dcc3c2d8e5cc9a145d474c9376.jpg
 
make sure you test them by putting them under water. with pressure on them
 
Are those manifolds the keg king ones? Or are they from somewhere else?

I'm looking for one for my keezer but I'm not sold on the keg king ones.
 
Following with interest.

My keezer build was a great time. I admire your ambition, I struggle to keep my 4 keg/3 tap keezer stocked with full kegs, let alone that many. There's never enough brew days...
 
I'd unscrew all the threaded parts on those manifolds and then apply silicon or thread sealant and screw them back in again. I had to do it with mine when I found a leak in it early on, haven't had a problem since.
 
The problem with some of the dodgy KK ones was the taps themselves leak which couldn't be solved by sealant on the threads
 
Abouts to get crackin....
No alucabond yet but im pretty sure i got every thing else covered
cc0e97eaf507d9de46b5cf984712f1f9.jpg
 
So i picked up some form ply
a616c6ef76eab8ee8857883dfff88649.jpg


Some 10mm foil board
e8d1e33a29801fdc3ea8b4fcf5e75114.jpg


Knocked up a box and lined it with the foil for insulation.
I ran into a bit of trouble as the taps i purchased have a pretty short shank so ive had to loose the plastic bezel and countersink the foil so i can fit everything on.

I had some foam seal from work which i made a gasket between the new box and freezer.
e2b58f9787a3d32d714780d34f728d55.jpg

f7dc560e36af77a4ce8a0088e7b76a8b.jpg
7ffe618b4d4e4c2c7dd5f35ac218786c.jpg


Just mocked up for now once i get my cladding ill run the lines.
Im choosing to leave my stc1000 externaly as its a new freezer under warranty and id rather not compromise it just yet. Maybe in a year [emoji6]
 

Latest posts

Back
Top