Instructions For Mashmaster Temp Controller

[djackal]

Hi guys, I finally got the chance to play around with this device but have lost my instructions.

I got a sparky mate of mine to wire it up but not sure if it is working (the device turns on but the load doesn't seem to have power? ) . He basically cut an extension chord in half sticking one end into one side and the othe comes out of thye 'load' side. (he didn't think earthing was neccesary).

I remember that the instructions had wiring instructions and also how to set it up. Does anyone here have these instructions and could they please post them here?

Cheers
Carl

 

[warrenlw63]

Carl is it the fridge model you're talking about? If so it could just be the delay. Leave it on for around 9 minutes and it should switch on. I thought the same thing with mine when I first put it together. :unsure:

Warren -

View attachment FridgeMate_Instructions_Colour.doc

 

[djackal]

Cheers for the instructions. I think the wiring will have to be altered a little based on the diagram. There appears to be wires from the 220vAC side across to the load side. We thought this was internal.

Cheers again Warren

 

[Voosher]

FWIW this is a description terminal by terminal of my wiring.

Terminal 1: Connection of "Live" to Terminal 5.
Terminal 2: Connection of "Live" from female plug for fridge.
Terminal 3: Red lead for probe.
Terminal 4: Grey lead for probe.
Terminal 5: Connection of "Live" for male plug to powerpoint AND connection of "Live" to Terminal 1.
Terminal 6: Connection of "Neutral" from male plug to powerpoint AND "Neutral" to female plug for fridge.

In addition the earth from my extension cord has been left intact.

Hopefully this helps a little to clarify the wiring diagram.
No explosions from the unit... yet