In Line Diffuser

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Took some pics today of the inline infuser in action.

Beers,
Doc

All_Grain_Brewing_Equip_038.jpg


All_Grain_Brewing_Equip_033.jpg
 
And as you can see, lots of aeration :lol:

Beers,
Doc

All_Grain_Brewing_Equip_036.jpg
 
Righto, will have to add some stuff to my Morebeer order ;)


EDIT : is that the 2 micron stone?
 
Hoops said:
Righto, will have to add some stuff to my Morebeer order ;)


EDIT : is that the 2 micron stone?
[post="52482"][/post]​

Yep 2 micro.
It is the only one they sell with 1/2" thread.
I believe Batz has one too.

Beers,
Doc
 
The way I had my inline aerator setup was causing me grief because it was so long. Here it is (including the plans to rebuild it, and a beautiful glass of Hourglass IPA).

InlineAerator_001.jpg

So after sourcing a 1/2" cross piece from MoreBeer (becuase Prochem don't do one), I've now reconfigured the arrangment like so.

InlineAerator_006.jpg

Should be much better.

Beers,
Doc
 
From what i can see, is your aeration system almost folded now if you know what i mean.

Will
 
Pretty much kungy.
If the dial temp gauge had a shorter stem then the whole unit would be more compact. But I'm not complaining :p

Doc
 
This is going to get redesigned again tonight to design mod #3.
Been having a few issues with flow rate with the wort having to go round corners too many times in conjuction with the aeration stone reducing the flow rate.
I have a good idea on how I'll do it, but has anyone built one recently and have and pictures of your setups ?

Beers,
Doc
 
Is the stone on the inlet or the outlet side of the pump?
 

Latest posts

Back
Top