• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Huge All Brand New & Unused Equipment Sale

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FunkeBrewster

Active Member
Joined
29/7/16
Messages
36
Reaction score
3
So after having collected all of the below gear in preparation to begin the construction of a semi-automated, hard piped HERMS system on my return from overseas, I have had medical advice that alcohol is no longer a part of my life. Great.

Postage/delivery will be priced on a per item basis, otherwise its pickup in the Logan area QLD.
I can take small items to Perth as I travel for work.
I have photos and links available if you require.
So for your viewing pleasure I present to you the following items that are all brand new and totally unused (except for some fermenting gear which I have noted):

Hardware:
3 x 20Gal/76L SsBrewtech Brew Kettles - $350 each
1 x Hugenau HU26-40 Stainless Steel Heat Exchanger - $250
1 x MashMaster Grain Mill - $250
2 x SS Head (Center) Replacement for Chugger/March pump - $125 each
1 x 304 SS 10" Coil with 2 bends 50' x 1/2" OD - $150
1 x 17" Long, 1"/1.5" Tri-Clamp Compatible Whirlpool Arm (to suit 20Gal Kettle) - $100
2 x 5500W Ripple Element, 1"/1'5" Tri-Clamp Compatible SS - $100 each
1 x Lauterhexe Filter Kit (NPT) 120cm Long - $75
1 x Motion Dynamics Worm Drive Motor w/ DC Speed Controller - $125
1 x Yeast Forge Digital Stir Plate - $100
3 x 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & 8ft Lead - $40 each
3 x 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect - $35 each

Tri-Clamp Fittings:
1 x 1.5" Tri-Clamp Wort Strainer w/ 3" OD Body, Rigid Element w/ 5mm Holes & 0.4mm Mesh Sock - $125
3 x 1"/1.5" Tri-Clamp Pickup Tube (Dual Flange) - $12.50 each
1 x 1"/1.5" Tri-Clamp Compatible Sight Glass, 170mm Long - $35
3 x 1"/1.5" Tri-Clamp Compatible Butterfly Valve - $35 each
32 x 1"/1.5" Tri-Clamps - $5 each
32 x 1"/1.5" Tri-Clamp Silicone Gaskets - $1 each
6 x 1"/1.5" Tri-Clamp Compatible 3-Way Tee - $12.50 each
16 x 1"/1.5" Tri-Clamp Short Ferrules - $2.50 each

Fermenting/Measuring & Testing:
1 x Milwaukee MW102 pH Meter w ATC - $140
1 x 250ml Graduated Marking Borosilicate Glass Test Jar - $15
1 x 5Lt Plastic Measuring Jug - $12.50
1 x Refractometer Specific Gravity & 0-32 Brix w/ATC & Case - $30
1 x Triple Scale Hydrometer - $10
1 x 3000ml Erlenmeyer Flask - $15
1 x Bottle Rinser/Sanitiser Kit USED- $15
1 x Bottle Tree (90 Bottle Capacity) USED - $25
1 x Bottle Tree (70 Bottle Capacity) USED - $15
1 x 60Lt Polyethylene Fermenter USED - $20
1 x 30Lt Polyethylene Fermenter USED - $10
1 x 30Lt Glass Fermenter USED - $15
6 x 5-8Lt Glass Fermenters/Carboys USED - $8 each
1 x Brew Cellar Fermenter Heating Pad USED - $10
20 x 750ml Champange Style Bottles (Wine & Beer) USED - $2 each
10 x 375ml Champange Style Bottles (Beer) USED - $1 each

Electrical/Electronics:
1 x BCS-462 Brewery Control System - $250
1 x IP66 HD Galvanised Metal Enclosure Switchboard 400mm x 500mm x 200mm - $100
1 x IP66 HD Galvanised Metal Enclosure Switchboard 300mm x 400mm x 200mm - $75
1 x Eaton NO 20A 6.5kW IP65 2 Pole Panel Mount Non Fused Isolator Switch - $40
1 x Conrad Aluminium Heatsink 350mm x 151mm x 48mm - $40
1 x 220VAC to 12VDV 33A Power Supply - $25
2 x Hager 250V 25A 1 pole NO Contact - $15 each
3 x 250V 20A NEMA L6-20 Flanged Twist-Lock Receptacle - $20 each
2 x 250V 30A NEMA L6-30 Flanged Twist-Lock Plug - $20 each
3 x 250V 20A NEMA L6-20P Twist-Lock Locking Plug - $20 each
3 x 250V 30A NEMA L6-30P Twist-Lock Plug - $20 each
2 x 250V 30A NEMA L6-30R Twist lock Receptacle - $20 each
1 x LED Dual Voltage/Current Display 100V AMP 12V 24V DC Volt Meter 100A Shunt Solar - $10
2 x 24-280VAC to 3-32VDC 40A SSR (RS Pro) - $40 each
7 x 24-280VAC to 3-32VDC 40A SSR (Fake Fotek but suitable for lower rated loads) - $5 each
1 x Female Cat5e RJ45 Connector, Straight, Cable Mount (Neutrik)- $10
10 x 3 Way Cable Mount XLR Connector, Male, Silver Plated Contacts, 250VAC (RS Pro) - $1 each
10 x 3 Way Panel Mount XLR Connector, Female, Tin Plated Contacts (Amphenol)- $2 each
1 x 230-400VAC to 115VAC 63VA Panel Mount Transformer (Legrand 383-308) - $50
1 x 125VAC 15A DIN Rail Mount Dual Outlet - $15
1 x TP-Link TL-WR700N 150Mbps 1-Port 10/100 Wireless N Router (USA plug) - $10
1 x Telemecanique/Schneider 2 Position Toggle Switch ZB5 AD29 - $3
5 x 400mm Long 35mm Wide Slotted Metal DIN Rail - $15
5 x Schneider 3 Position Selector Switch (22mm Cutout) (ZB5AD3) - $15 each
5 x 220VAC White LED (22mm Cutout) - $2.50 each
3 x 220VAC Blue LED (22mm Cutout) - $2.50 each
2 x 220VAC Orange LED (22mm Cutout) - $2.50 each
1 x 220VAC Green LED (22mm Cutout) - $2.50 each
1 x 220VAC Red LED (22mm Cutout) - $2.50 each
1 x Schneider Green Non Illuminated Plastic Push Button (ZB5AH03) - $10
1 x Schneider Red Non Illuminated Plastic Push Button (ZB5AH04) - $10
1 x Schneider 2 Direction & Stop Push Button (ZB5AA71114) - $15
1 x Schneider Potentiometer Head w/ Contact Base (22mm Cut Out) (ZB5AD922) - $75
1 x Schneider Maintained Push Button Head (22mm Cut Out) (ZB5AD28) - $30
10 x Schneider Mounting Collars (ZB5AZ009) - $4 each
12 x 40mm x 30mm x 600mm Plastic Cable Ducting w/ Covers - $5 each
* I have many NO & NC contacts for the above switches and buttons.
* I have coloured wiring, heat shrink, ferrules, glands & terminal blocks
 
Last edited:
postage on the MD mill motor to Melb? Also is it the version with the overload protection?
Info & pics of the heat exchanger?
 
PM sent re: PH Meter.

Sorry about that terrible news, Funke.

:(
 
postage on the MD mill motor to Melb? Also is it the version with the overload protection?
Info & pics of the heat exchanger?
and yes it has the overload protection.
I'll get back to you with postage to Melb on the mill motor as well the heat exchanger. But bear in mind the heat exchanger weighs 6kg so postage could be rather pricey on this.

The heat exchanger is the following:
Hugeanu HU26 AIS136L
Capacity:1-50KW
Plate thickness:0.4mm
# of Plates: 40
Exchange Surface area: 0.026*N sq.m
Max working pressure: 3.0Mpa
Connection: G 1" * G 1"
Dimensions: 310mm L x 100mm H x 105mm W
Weight: 6kg
IMG_0210.jpg

Screen Shot 2018-01-21 at 9.35.19 AM.png

IMG_0037.jpg

IMG_0036.jpg
 
PM sent re: PH Meter.

Sorry about that terrible news, Funke.

:(

Cheers mate. Terrible indeed though could be worst news so positive there!
Shipping including tracking and signature + insurance would be $20 to you.

Let me know.
IMG_0039.jpg
 
and yes it has the overload protection.
I'll get back to you with postage to Melb on the mill motor as well the heat exchanger. But bear in mind the heat exchanger weighs 6kg so postage could be rather pricey on this.

The heat exchanger is the following:
Hugeanu HU26 AIS136L
Capacity:1-50KW
Plate thickness:0.4mm
# of Plates: 40
Exchange Surface area: 0.026*N sq.m
Max working pressure: 3.0Mpa
Connection: G 1" * G 1"
Dimensions: 310mm L x 100mm H x 105mm W
Weight: 6kg


Hey mate can you just get a price on the mill motor postage and if it definitely has the sensing option Ill take it. The HX is a bit small for what I'm after.
 
I'm sorry to hear, it must be gut wrenching to sell everything before you get to build your dream rig.

As it all needs a good home interested in:
3 x 1"/1.5" Tri-Clamp Compatible Butterfly Valve - $35 each
3 x 1"/1.5" Tri-Clamp Compatible 3-Way Tee - $12.50 each
3 x 1"/1.5" Tri-Clamps - $5 each

If you are able to shoot me some pics of the strainer I might grab that too.

Thanks in advance.
 
Thanks mate.

Butterfly valves are no longer available.
Tee's and tri-clamps I can do.
Attached is a photo of the wort strainer. That will need another 1"/1.5" Tri-Clamp.
Let me know via DM what you want to go ahead with.
Wort Strainer.jpg
 
The following items have SOLD and are NO LONGER AVAILABLE:

1 x Motion Dynamics Worm Drive Motor w/ DC Speed Controller - $125
1 x Yeast Forge Digital Stir Plate - $100
1 x 1"/1.5" Tri-Clamp Compatible Sight Glass, 170mm Long - $35
3 x 1"/1.5" Tri-Clamp Compatible Butterfly Valve - $35 each
1 x Milwaukee MW102 pH Meter w ATC - $140
1 x 60Lt Polyethylene Fermenter USED - $20
1 x 30Lt Glass Fermenter USED - $15
6 x 5-8Lt Glass Fermenters/Carboys USED - $8 each
20 x 750ml Champange Style Bottles (Wine & Beer) USED - $2 each
10 x 375ml Champange Style Bottles (Beer) USED - $1 each
1 x 220VAC to 12VDV 33A Power Supply - $25
1 x LED Dual Voltage/Current Display 100V AMP 12V 24V DC Volt Meter 100A Shunt Solar - $10
 
Back
Top