Grundy Tap Fitted Direct To Keg

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Thunderlips

Well-Known Member
Joined
2/10/04
Messages
819
Reaction score
1
Anyone know where I might be able to find the fitting that goes between the tap and the liquid disconnect?
I've seen the whole setup for sale an Ebay but I don't need the tap or the disconnect. Thanks.
Here's a pic of the what I mean...
tap.jpg
 
T,lips,
Give GMK a PM.
I think he got one for another AHB member recently, or at least he was asked about one.
Cheers
 
I just bought two from Morebeer.com

Beers,
Doc
 
I have a couple if your interested

Batz
 
I have a similar setup on a 10 litre keg. I found that it gave a very frothy result, so I'm looking at removing it and replacing with a metre or 2 of beer line and a picnic tap/pluto gun.

YOu have to use very very low serving pressures for it to be any good.
 
Yeah I have had the same problem.
This is what I do now, works a treat. (Thanks Roach for doing the bullk order)

cobra_tap_1.JPG
 
Yeah I have had the same problem.
This is what I do now, works a treat. (Thanks Roach for doing the bullk order)

Hoops, that looks fancy. What exactly is it?
Thanks all for the replies so far.
 
barfridge said:
I have a similar setup on a 10 litre keg. I found that it gave a very frothy result, so I'm looking at removing it and replacing with a metre or 2 of beer line and a picnic tap/pluto gun.

YOu have to use very very low serving pressures for it to be any good.
[post="54928"][/post]​

I've got a couple of these tap set ups from BD in the US and I dont have any probs.
IMO they are excellent for a party.

Cheers
 
dicko said:
barfridge said:
I have a similar setup on a 10 litre keg. I found that it gave a very frothy result, so I'm looking at removing it and replacing with a metre or 2 of beer line and a picnic tap/pluto gun.

YOu have to use very very low serving pressures for it to be any good.
[post="54928"][/post]​

I've got a couple of these tap set ups from BD in the US and I dont have any probs.
IMO they are excellent for a party.

Cheers
[post="54962"][/post]​


Work well for me to Dicko

Batz
 
Thunderlips said:
Yeah I have had the same problem.
This is what I do now, works a treat. (Thanks Roach for doing the bullk order)

Hoops, that looks fancy. What exactly is it?
Thanks all for the replies so far.
[post="54950"][/post]​

Thunderlips. It is an inline flow restrictor. You can have greater than pouring pressure in the keg and regulate the beer flow with the restrictor.
Roach did a bulk order of them a few months back, from the UK.

Beers,
Doc
 
Hoops said:
Yeah I have had the same problem.
This is what I do now, works a treat. (Thanks Roach for doing the bullk order)
[post="54942"][/post]​


Can We get these things from anywhere online?
 
Back
Top