Giveaway:Inkbird Temperature Controller ITC-100VH + K sensor + 25DA

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
n87 said:
Do you have a version with Aus plug?
Hi friend,
Our controllers can be used in 110V~ 240V devices
But now we just have US plug and EU plug.

Here is the Features of ITC-310T
Temperature Control Range : -50~120℃ /-58~248 ℉
Temperature Resolution : 0.1 ℃ / 0.1℉
Measuring Accuracy : ±1℃ (-50 ~ 70℃) / ±1℉ (-58 ~ 158℉)
Temperature Control Mode: On/Off Control, Heating and Cooling
Timing Range: 1~999 (min/hour/day)
Periods of Time Max: 6 periods
Cycle Setting: 1-999 times cycle, or 00 infinite cycle
Input Voltage: 100 ~240VAC, 50Hz/60Hz
Control Output Current: Max.10A
Voltage: 100~240V AC
Power: Max.1200W(110V)/2200W(220V)
Alarm: High and Low Temperature Alarm
Sensor Type: NTC Sensor(including)
Sensor Length: 2m / 6.56ft
Relay Output: Cooling(10A,100-240VAC)
Heating(10A,100-240VAC)
Input Power Cable Length: 1.5m ( 5ft )
Dimension: 140x68x33 mm(body)
Operating Ambient Temperature: -30~ 75 ℃ / -22~ 167℉
Storage Condition Temperature: -20~ 60℃ / -4~ 140℉
Humidity: 20~85% (No freeze or moisture condensation)
Warranty: 1 Year


Thank you.
 
Done...!! And welcome to the community!
 
inkbird said:
Hi friend,
Our controllers can be used in 110V~ 240V devices
But now we just have US plug and EU plug.




Thank you.
Hi friend,

Does that mean they can't be used in Australia?

Thanks
Your Friend Brad
 
bradsbrew said:
Hi friend,

Does that mean they can't be used in Australia?

Thanks
Your Friend Brad
Yes I see it as a problem, with an Australian plug I'll be in for two of these.
 
Batz said:
Yes I see it as a problem, with an Australian plug I'll be in for two of these.
Hi friend,
We just have US ,EU plug now. you can buy an adapter to use this controller.
And our company is making ITC-310T in AU plug now.
It will have AU plug for sell soon after.
Thank you
Regards
 
bradsbrew said:
Hi friend,

Does that mean they can't be used in Australia?

Thanks
Your Friend Brad
If the devise is "as good as it sounds" (sliced bread comes to mind!!) couldn't/wouldn't you just change the plugs for standard 3 pin Australian plugs and sockets

Wobbly
 
wobbly said:
If the devise is "as good as it sounds" (sliced bread comes to mind!!) couldn't/wouldn't you just change the plugs for standard 3 pin Australian plugs and sockets

Wobbly

You could but for that sort of money I don't want to change plugs/sockets or use adapters.
 
Ahhh, some of you people didnt read the entry criteria - Reply ONE TIME ;)

Oh..... crap.....


Just kidding. Serious post below.
 
inkbird said:
Hi,friend,
Thank you for your interest in our products.
Could you please tell we which type thermostat do you want?
Thanks Inkbird. I would potentially be interested in:

ITC-100VH+ K SENSOR + 40A SSR PACKAGE:

  • 1 x Inkbird ITC-100VH Pid Temperature Controller
  • 1 x 2m K Sensor
  • 1 x 40A SSR for temperature controller
  • 1 x Mounting Bracket
  • 1 x Manual
AND an extra:

PT100 Sensor Features:

Temperature rang :-50~250ºC
Length: 1M
Sensor Diameter: 4mm, probe length: 30mm





If you could do this, please feel free to pm price etc if preferred.

Thanks
 
Not adding a second reply but ,jeez it it doesn't take long for red hot deal to go arse up around here.
Typical AHB...love it and I'm no angel,.

Please continue as usual .....;)
 

Latest posts

Back
Top