Ghetto TapKing

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hotmelt

Well-Known Member
Joined
19/7/11
Messages
198
Reaction score
118
Location
Between the hills
I bought a Carbonator cap the other week from CB and after using it I thought I'd try and put a tap on and use it like a TapKing,and so after searching for a solution I managed to put this together.
post-21635-0-43608000-1377861292_thumb.jpg
PB270401.JPG

post-21635-0-78430700-1377860669_thumb.jpg
PB280425.JPG
It's held up with velcro at the moment
post-21635-0-05249700-1377860865_thumb.jpg
PB280426.JPG
And this is it off the bottle.

post-21635-0-55708600-1377861580_thumb.jpg
PB270414.JPG
 
You could attach a sodastream and reg by adding another John Guest mfl in place of the 16g co2.Also you could get a bigger pet bottle.
 
When in doubt, check the dirt cheap stores for generic cola brands.
 
bradsbrew said:
Does anyone still do 3L PET bottles or is 2.25L the biggest.

Cheers
You can also link two or more together to make up for the smaller bottles.

post-21635-0-14613200-1377917831_thumb.jpg
PB280423.JPG

Though the gap between them would need to be a bit bigger depending on the size of the bottles you use.
 
Hahahahahaaa......... that's bloody awesome well done Brother.
 
Nice work. Is the gas just to push to the glass? I assume the bottles are carbonated?
 
NickB said:
Nice work. Is the gas just to push to the glass? I assume the bottles are carbonated?
The first bottle I used the carbonator then used the keg charger but it was hard to get the gas right, thats why I think the mini reg would give more control or use a normal reg and soda stream.
post-21635-0-83356700-1377940726_thumb.jpg
PB290427.JPG

You could also combine it with the party pack.
post-21635-0-83982900-1377940927_thumb.jpg
PB270419.JPG

Just add ice :D
 
Improvise adapt and overcome. It doesnt have to look pretty it just has to work. Thats the principle i live by. You seem to be at one with the ghetto spirit. Love your work( True story)
 
yet again, homebrewers excelling at tightarsed inventive solutions.. well done!
 
I found out that I needn't have the bottle upside down anymore by simply pushing some beer line into the carbonator.Now it can lie down on a shelf or stand upright.

post-21635-0-06933100-1381283235_thumb.jpg
P1060465.JPG
post-21635-0-11329500-1381283281_thumb.jpg
P1060463.JPG
 

Latest posts

Back
Top