FS (Bris): Intertap / Bracton tap, B-lock, shank assemblies

[Meddo]

Hi all, dismantling my current keezer and have a bunch of taps, shanks, and Bracton B-lock (Snaplok / Fatlock equivalent) sets to move on.

I'll post some photos tonight but I've got eight sets of the following components (new price listed):

• Tap (Intertap SS $24 - www.kegland.com.au/intertap-ss-tap-only-stainless-steel.html)
• Solid Stainless Tap Handles (not chrome) (eBay / Aliexpress $14 - www.ebay.com.au/itm/121928157070)
• Tap Shank Adaptor (Bracton TA1080 – Tap Shank / B-Lock (locking spline) and Bracton TA1110 – Beer Tap Shank Coupler Nut / Chrome $15 - www.bracton.com/equipment/beer-taps-faucets-beer-guns-accessories/
• Female B-Lock Adaptor (Bracton SF2020 – B-Lock Adaptor 5/8” (for keg couplers) $29 - www.bracton.com/equipment/connections/b-lock-beer-fittings-snap-lock-compatible/)
• Panel Extension / Shank (Bracton FA1085 – 5/8″bspm x 1/2″bsp x 3″
  SS 1/4″bsp internal thread $21 - www.bracton.com/equipment/beer-taps-faucets-beer-guns-accessories/)
• John Guest 8mm Pushin (John Guest Straight Adaptor 5/16 x 1/4 BSP thread $6.50 - hoppydaysbrewingsupplies.com.au/product/john-guest-straight-adaptor-5-16-x-1-4-bsp-thread/
• John Guest 8mm Elbow (John Guest Stem Elbow 5/16 $5.50 - https://hoppydaysbrewingsupplies.com.au/product/john-guest-stem-elbow-5-16/)

So ~$115 new per set, I'll sell these for $80 each with a little trim if you buy a few. Located in Brisbane, happy to post at buyer's expense. Each has probably only had 3-5 beers poured through it. Photos of full assemblies to come later, but here's a few historical pics of them installed in my keezer: (edit: photo of assembly added)

 

[Meddo]

Dropping price to $50 each assembly to move these, well under half new price.

 

[Meddo]

Two sets remaining

 

[Meddo]

Sold