sponge
Dungeon O' Sponge Brewery
- Joined
- 12/1/08
- Messages
- 4,224
- Reaction score
- 707
Hi All,
Just gauging some interest on my brewing and kegging gear that I might be selling due to a move.
Brewing Setup (BIAB style setup)
1 x 130L Cheeky Peak SS Pot
1 x 100L (from memory, possibly 90L) SS pot with legs welded and mesh screen on base as 'malt pipe'. I use a large BIAB from craftbrewer inside as the mesh screen is a little large by itself
2 x 5.5kW low-density elements (single phase)
1 x 125kg/250kg Giant electric hoist (to lift the 'malt pipe')
1 x control panel w/ 2 x ramp/soak PID controllers and two additional 10A outlets (which I used for a pump and a fan in the brew shed). I had 3-phase/63A power to the brew shed, so would probably suit someone with a similar capacity, although the control panel is wired for single-phase appliances (but spread across the 3 phases) so could be re-wired for a decent single phase supply if need be.
1 x in-line chugger pump
1 x other decent pump which I used for the hot water kettle, although forget the brand name
1 x upright fermenting fridge w/ STC1000 + belt heater
1 x 50lt keggle HWT w/ sight glass and 2.2kW element
3-piece SS fittings throughout and silicon hosing with disconnect fittings
I've got boxes of other fittings, grain storage buckets and whatnot I can throw in to the sale.
Unfortunately I don't have the stand that I used for the setup anymore as some of it had rusted so I threw it out. I just made it out of bunnings shelves so you could do the same.
$1250
Kegging Setup
~10 x 19L corny kegs. Probably need new fittings on a couple of them, but pretty sure they're all in decent condition
1 x 9L SS keg
6 x perlick taps
2 x 4-way gas manifold, connected together to make 8-way manifold
6 x beer lines with disconnects
6 x gas lines with disconnects
1 x large CO2 bottle with dual regulator and non-return valve
1 x small CO2 bottle
1 x 450L chest freezer, unused. Initially purchased to replace my old 450L chest freezer that eventually stopped cooling, but never got around to building another collar for it, so has just been sitting in the garage. Some small scuffs from being near foot traffic, but otherwise perfect condition.
I'm sure there's other bits and pieces I could throw in as well.
$1250
All items pickup from Southern Highlands, NSW
As I mentioned, I'm just putting this up to see if there are any interested brewers out there for now.
At this stage I'd be wanting to sell the brewing gear and kegging gear as whole items, but if there's no interest for either, I'd be willing to split up to individual items later on.
Happy to answer any questions you might have. Unfortunately I don't have any photos of the gear as I've got it packed in the garage and is pretty difficult to get to. If anyone is genuinely interested I can try and get some items out to take photos (such as the brewing pots/control panel/other custom items).
Just gauging some interest on my brewing and kegging gear that I might be selling due to a move.
Brewing Setup (BIAB style setup)
1 x 130L Cheeky Peak SS Pot
1 x 100L (from memory, possibly 90L) SS pot with legs welded and mesh screen on base as 'malt pipe'. I use a large BIAB from craftbrewer inside as the mesh screen is a little large by itself
2 x 5.5kW low-density elements (single phase)
1 x 125kg/250kg Giant electric hoist (to lift the 'malt pipe')
1 x control panel w/ 2 x ramp/soak PID controllers and two additional 10A outlets (which I used for a pump and a fan in the brew shed). I had 3-phase/63A power to the brew shed, so would probably suit someone with a similar capacity, although the control panel is wired for single-phase appliances (but spread across the 3 phases) so could be re-wired for a decent single phase supply if need be.
1 x in-line chugger pump
1 x other decent pump which I used for the hot water kettle, although forget the brand name
1 x upright fermenting fridge w/ STC1000 + belt heater
1 x 50lt keggle HWT w/ sight glass and 2.2kW element
3-piece SS fittings throughout and silicon hosing with disconnect fittings
I've got boxes of other fittings, grain storage buckets and whatnot I can throw in to the sale.
Unfortunately I don't have the stand that I used for the setup anymore as some of it had rusted so I threw it out. I just made it out of bunnings shelves so you could do the same.
$1250
Kegging Setup
~10 x 19L corny kegs. Probably need new fittings on a couple of them, but pretty sure they're all in decent condition
1 x 9L SS keg
6 x perlick taps
2 x 4-way gas manifold, connected together to make 8-way manifold
6 x beer lines with disconnects
6 x gas lines with disconnects
1 x large CO2 bottle with dual regulator and non-return valve
1 x small CO2 bottle
1 x 450L chest freezer, unused. Initially purchased to replace my old 450L chest freezer that eventually stopped cooling, but never got around to building another collar for it, so has just been sitting in the garage. Some small scuffs from being near foot traffic, but otherwise perfect condition.
I'm sure there's other bits and pieces I could throw in as well.
$1250
All items pickup from Southern Highlands, NSW
As I mentioned, I'm just putting this up to see if there are any interested brewers out there for now.
At this stage I'd be wanting to sell the brewing gear and kegging gear as whole items, but if there's no interest for either, I'd be willing to split up to individual items later on.
Happy to answer any questions you might have. Unfortunately I don't have any photos of the gear as I've got it packed in the garage and is pretty difficult to get to. If anyone is genuinely interested I can try and get some items out to take photos (such as the brewing pots/control panel/other custom items).
Last edited:
