• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

For Sale : Full 3 Pot 70lt Brewery

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gava

I do rather like beer.....
Joined
23/1/09
Messages
1,198
Reaction score
99
Hi All,

Due to a busy family and my wife taking over my brewery for her new business I've come to the realisation that I should sell up.
At the moment I don't have a price in mind I'm just going to check if there is any point, Of course I understand it's hard to say "Yeah I'm interested without seeing a price"
I've got leave coming up over Christmas so I'll work out a price..

My preference would be to sell it in one lot but if no one takes it I'll put up the items on their own, Although I wont be taking any requests to hold if I sell individual items at the moment, that screams of book keeping and who can be assed.

Ok So what is it? FULL Brewery ready to go!

You can check out my build post here and a picture below. (Location Bendigo, Victoria)

What will be included?
  • The Electric brewy clone control panel which uses a 20amp plug, internal wires are 32amp can be rewired for 40amp so you can control HLT and BK at same time for back to back brewing
    4 x PID Controllers (One setup and prewired for an external HERMS pot)
  • 1 x Auder Timer + Reset Button
  • H20 In Switch + light indicator
  • Pump 1 on/off Switch + light indicator
  • Pump 2 on/off switch + light indicator
  • Chiller On/off switch + light indicator
  • Element Selection 3 way switch.. HLT | OFF | BK
  • All Pids and Timer share Alarm + ALARM AUTO/OFF switch.
  • Keyed main power on/off + indicator light

[*]3 70lt brewing vessels with Triclover fittings and hoses
  • HLT - 70lt with a HERMS SS Coil and sigh gauge + 4800watt element
  • MLT - 70lt with False bottom and wort return arm
  • BK - 70lt with wort return for wirlpooling.

[*]1 x 4800 watt low density element in boil kettle with tri clover connected at rear for easy removal for cleaning
[*]1 x 4800 watt high density element in HLT
[*]3 x RTD quick disconnect temp probes
[*]4 x Tri Clover Ball Values
[*]Tro clover covers and silicone inserts
[*]Blue Stand
[*]Coaxial Copper Heat Exchanger
[*]Two Green pumps with tri clover attachements
[*]Two Electric ball values for auto water in and pump water in
[*]A sorted brewing stuff
  • Cleaners
  • General Copper and Stainless Steel stuff
  • Some fermenters 23lt
  • Grain (oldish)
  • Grain Mill
  • Refactomenter
  • PH Meter
  • Digital Stir plate (Maybe i might keep this one because they're great)


I think that's about it, I'll be keeping all my Kegging kit and bar ware this is just for the Brewery itself. If I find anything else I'll update the posts..

Merry Christmas and a Happy new year

IMG_9655.JPG
 
That is impressive, all the best for the sale (I'm sure you'll have no shortage of willing buyers!).
 
AHH yes Location... Bendigo, Victoria about 1 1/2 from Melbourne.
 
Gav, your last system has been serving me well, as I am sure the new one will serve someone well too.
 
Where did you get the Coaxial Copper Heat Exchanger?

I'd be interested in that if you decide to split.
 
MAX POWER said:
Where did you get the Coaxial Copper Heat Exchanger?

I'd be interested in that if you decide to split.
We sold them when we ran brewrig.
 
Hi Gav. Were interested for a pilot system for the brewery will call tonight if that's OK. Cheers Tracey
 
mmmyummybeer said:
Hi Gav. Were interested for a pilot system for the brewery will call tonight if that's OK. Cheers Tracey
yeah sure too easy
 
Dang. Someone stands to pick up an awesome rig. Will you still try and brew Gava?
 
mmmyummybeer said:
Hi Gav. Were interested for a pilot system for the brewery will call tonight if that's OK. Cheers Tracey
Glad to hook you guys up.. sounds perfect for your needs
 
Camo6 said:
Dang. Someone stands to pick up an awesome rig. Will you still try and brew Gava?
not right now, Family life etc keeping me busy at the moment... But I'm already thinking of a smaller single rig design to build when I start brewing again.
 
Still plenty of fun and amusement to be had building a 1V rig :D
 
OK Everyone - was going to brew but now I can't be assed.. My brewery and all my stuff.. including two fermenting fridges if you want them..

$2500 - Pick UP ONLY Bendigo - Victoria

Hi All,

Due to a busy family and my wife taking over my brewery for her new business I've come to the realisation that I should sell up.
At the moment I don't have a price in mind I'm just going to check if there is any point, Of course I understand it's hard to say "Yeah I'm interested without seeing a price"
I've got leave coming up over Christmas so I'll work out a price..

My preference would be to sell it in one lot but if no one takes it I'll put up the items on their own, Although I wont be taking any requests to hold if I sell individual items at the moment, that screams of book keeping and who can be assed.

Ok So what is it? FULL Brewery ready to go!

You can check out my build post here and a picture below. (Location Bendigo, Victoria)

What will be included?
  • The Electric brewy clone control panel which uses a 20amp plug, internal wires are 32amp can be rewired for 40amp so you can control HLT and BK at same time for back to back brewing
    4 x PID Controllers (One setup and prewired for an external HERMS pot)
  • 1 x Auder Timer + Reset Button
  • H20 In Switch + light indicator
  • Pump 1 on/off Switch + light indicator
  • Pump 2 on/off switch + light indicator
  • Chiller On/off switch + light indicator
  • Element Selection 3 way switch.. HLT | OFF | BK
  • All Pids and Timer share Alarm + ALARM AUTO/OFF switch.
  • Keyed main power on/off + indicator light

[*]3 70lt brewing vessels with Triclover fittings and hoses
  • HLT - 70lt with a HERMS SS Coil and sigh gauge + 4800watt element
  • MLT - 70lt with False bottom and wort return arm
  • BK - 70lt with wort return for wirlpooling.

[*]1 x 4800 watt low density element in boil kettle with tri clover connected at rear for easy removal for cleaning
[*]1 x 4800 watt high density element in HLT
[*]3 x RTD quick disconnect temp probes
[*]4 x Tri Clover Ball Values
[*]Tro clover covers and silicone inserts
[*]Blue Stand
[*]Coaxial Copper Heat Exchanger
[*]Two Green pumps with tri clover attachements
[*]Two Electric ball values for auto water in and pump water in
[*]A sorted brewing stuff
  • Cleaners
  • General Copper and Stainless Steel stuff
  • Some fermenters 23lt
  • Grain (oldish)
  • Grain Mill
  • Refactomenter
  • PH Meter
  • Digital Stir plate (Maybe i might keep this one because they're great)


I think that's about it, I'll be keeping all my Kegging kit and bar ware this is just for the Brewery itself. If I find anything else I'll update the posts..

Merry Christmas and a Happy new year

IMG_9655.JPG
 

Latest posts

Back
Top