• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Equipment For Sale For Sale - 3V System in Melbourne -SOLD

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ditchnbeer

Well-Known Member
Joined
8/8/13
Messages
124
Reaction score
45
3 Vessel Brewing system with PID control. Usually does 21 litre batches, can fit 40 litres in kettle. Uses 10Amp.

Breakdown of components:

Home made control box, with Auberin PID, pump switches and pump on indicators. All electrical devices unplug at bottom except HLT element. Element controlled via over-rated SSR.

CheakyPeak 40 litre plastic mash tun with home made flat false bottom.
SS Brewtech sparging ring fits during water re-circ / sparging.

HLT with HERMS coil, 10A element. Has a second 'booster element' if another 10A circuit can be found. Temps sensor on outlet.

2 pumps included. One pump runs sparge water into mash, second wort into kettle at same time.

Kettle has trub dam and volume guage built in. A very vigorous boil can be achieved due to high pressure gas burner sourced from USA.

Brewstand is 1400mm x 400mm wide. All hoses included.

This system has done over 100 batches, including high gravity beers (like barleywine 1120 OG) without issues. I have brewed a winning Flanders Ale for Vicbrew (second at Nationals) and numerous winners for club comps on this system.

$600 ONO
 

Attachments

  • IMG_0368.jpg
    IMG_0368.jpg
    2 MB · Views: 0
  • IMG_0352.jpg
    IMG_0352.jpg
    1.8 MB · Views: 0
  • IMG_0369.jpg
    IMG_0369.jpg
    2.6 MB · Views: 0
  • IMG_0370.jpg
    IMG_0370.jpg
    3.5 MB · Views: 0
  • IMG_0371.jpg
    IMG_0371.jpg
    3.5 MB · Views: 0
Last edited:

Latest posts

Back
Top