Fitting Andale taps to keezer

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bones39

Member
Joined
1/4/17
Messages
9
Reaction score
1
I'm getting together the parts to build a keezer. I have picked up 2 Used andale snap on taps that I'm planning to fit through a timber collar. Im having trouble finding some info on the parts I need to do this, can anyone help
Cheers
 
If you call andale and specify the panel adapter( 3/8 is cheapest) and let them know what size line your using they will sort you out with the *cooler adapter*(the bit that joins the beer line) you need>

(*) thats what andale call it???
 
Thanks for the reply, do you know if I need something extra to fit the beer line?
Cooler coupling to join your beer line to the panel adapter.
You'll need to specify your line diameter, ie: 5mm ID x 8mm OD if that's the line your using.
 
Hey Bones we want pics when you are done
I have perlicks but Andale are pro
here is a pic of my set up
Wouldnt mind a anadale to the left
IMG_1796.JPG
IMG_1798.JPG
 
Thanks everyone, I think I'm all over it now. I'm under some pressure now to make a good one now Rude want to see a photo
 
I use these.

The panel adaptor in the pic has some surface rust which will clean off nicely. (some idiot used zinc washers)

P_A_ASSY.jpg


They are made up of :

  • 5/8" Snaplock adaptor.
  • 5/8" x 1/2" panel adaptor.
  • 1/4" BSPM x your choice of 3/8" or 5/16" push in fitting.
P_A_EXP.jpg
 

Latest posts

Back
Top