• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Elements for electric home brewery

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Mitchpaul said:
Elements for electric home brewery
CAMCO 5.5 kw and 4.5 kw 240 v AC Ultra low Watt density (ULWD) ripple element. One of each.

Each element includes nut, washer and 2 silicon high heat o rings to fit them to a kettle or HLT as per the “The Electric Brewery” website method.

I recently build such a system, and over ordered on these parts as it was cheaper to order extra when importing from the US, im keeping a spare but will sell these remaining ones.
They are unused and still in the packet. They meet US requirements, but naturally you should have a licensed electrician install them and confirm electrical safety.
Mine have been working very well, the 5.5 kw keeps a good rolling boil of 80 litres, in a 30 gal (114 litre) kettle. The 4.5 kw one is more suited to a HLT or a 75 litre kettle id say.

Will put them on ebay if no interest here.

$ 70 each includes p and p. ono

attachicon.gif
20160705_120021_resized.jpg
attachicon.gif
20160705_120033_resized.jpg
attachicon.gif
20160705_120057_resized.jpg
attachicon.gif
20160705_120101_resized.jpg
attachicon.gif
20160705_120109_resized.jpg
attachicon.gif
20160705_120129_resized.jpg
attachicon.gif
20160705_122120_resized.jpg
attachicon.gif
20160705_122157_resized.jpg
 

Latest posts

Back
Top