DIY Brauduino System

[changchuyo]

I have been working in a Single Vessel project using the Matho's Brauduino, I have the first version ready to brew and currently I'm working on the next version, my own braumeister clone also based on Matho's controller. I modified the code to fit a 16x4 LCD and changed the language to spanish, I also have the translated code in spanish for 16x2, 16x4 and 20x4 LCD displays.


I found two cheap 43 liters chinesse pots (around US$ 15 each), and started to do all modifications.


First version


The malt basket

It was made from a dryer drum I found in a junkyard, Stailness Steel!!!!


A view of the heating elements

Standard cooper heating elements 1500Watts each (3000W). Water reachs 67°C in 22 minutes (40 liters).


Heating elements detail


Malt basket


Sight glass


Recirculation pump
I tested a universal washing machine pump (110VAC), working perfectly for 3 hours at 96°C without a single damage.


Control Box (Outdoor plastic IP65 Nema Box)


Controller shield - project board testing


Controller shield - assembled and tested


One of my 2 controllers fully assembled

And here is an advance of the next version:



Cheers from Caracas, Venezuela.

 

[Judanero]

Looks good mate!

Have you given it a run yet? If so how did it go without sealing the malt pipe against the base of the vessel? Ie- Was there still enough pressure from the pump outlet to recirculate/agitate the grain within the malt pipe?

Cheers

 

[changchuyo]

Hi Judanero, I tested the kettle and basket using a standard PID and Timer Box I built and the same SSR I'm using with the Brauduino. It works with reverse recirculation (reverse to braumeister, I mean). I succesfully brewed a delicious Red Ale few months ago.

 

[Judanero]

Ahhhh I see now, looks the goods mate!

 

[lael]

Very impressive! Your LCD cutout on that box is immaculate!

 

[changchuyo]

Very impressive! Your LCD cutout on that box is immaculate!

Thanks Beer God, I made it very carefully with a Dremel standard cutting disc, then used a fine flat file to remove the barbs.

Cheers

 

[lael]

Thanks Beer God, I made it very carefully with a Dremel standard cutting disc, then used a fine flat file to remove the barbs.

Cheers

lol- all it means is I've posted a lot. There are many more people with more experience than me

 

[stakka82]

Looks great. Amazed people such as yourself have the skill and patience to put things like that together!

 

[changchuyo]

lol- all it means is I've posted a lot. There are many more people with more experience than me

Hahaha, I did not saw your nick. Cheers!!!

lol- all it means is I've posted a lot. There are many more people with more experience than me

 

[RelaxedBrewer]

Very impressive mate!!!!

It looks fantastic. It must feel awesome to successfully build something like this.
Seriously jealous over this side of the pond.

 

[changchuyo]

As I promised, here are the pictures of the new version of my braumeister clone.










I'm still waiting for the recirculation pump...


Cheers

 

[lael]

They look amazing! Great work!

 

[Edak]

Nice work! I see that you have a thriving environment for them so they started multiplying.

 

[Edak]

Wait was that a CNC plotter in your picture? Would like to have the budget for something like that!

 

[changchuyo]

Wait was that a CNC plotter in your picture? Would like to have the budget for something like that!

Yes Edak, I built this CNC last year. I collected some used stepping motors and aluminum parts from junk. You don't have to spend a lot of money to build it. The most expensive part that I used was the controller board (around US$45 at amazon.com), the rest, as I told you, was found looking around and getting everything that I thought could be useful.

I did not spent more than US$ 200,00 building it (including the old PC). "Low cost high function"

Cheers.

 

[lael]

Wow.... what can you do with it?

 

[Edak]

Most CNC machines I have seen cost well in excess of 1k even if home built

 

[Cavemanbrew]

Would you mind posting the dxf files for the front of your control box

 

[changchuyo]

Would you mind posting the dxf files for the front of your control box

Sure, I will.

Cheers.

 

[changchuyo]

Here is the last version completely finished.

 

[Militz]

Here is the last version completely finished.

Great setup! looks really nice!

Did you give it a go yet? did the pump get the job done?
BTW, what pump is that? wasn't able to read in picture.

Thanks!

 

[eviltabouleh]

Good stuff. Love the malt pipe

 

[boybrewer]

Great setup! looks really nice!

Did you give it a go yet? did the pump get the job done?
BTW, what pump is that? wasn't able to read in picture.

Thanks!

It's a braumeister pump by the looks of it .