• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Complete 3 tier gravity system - make an offer

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

daveman

Member
Joined
30/6/19
Messages
5
Reaction score
1
Location
Hawthorn
Due to space constraints, I have switched to a Guten system, my old 3 vessel gravity system has to go, needs a quick scrub as has been sitting in the corner for a while
Location Hawthorn VIC, however can drop it off if not too far
Make me an offer - must go!

Boil Kettle - 50L Keggle
Ball Valve w.barb
Bazooka Screen
18m 1/2" immersion chiller w.hose fittings

Hot Liquor Tank - 50L Keggle
Ball Valve w.barb
Sight Glass + Spare glass
Thermowell
Glass Lid
2400w heating wand
Residual Current Device
2 ring burner + std. regulator

Mash Tun - 50L Keggle
Ball Valve w.barb
Thermowell
Insulative Jacket (barely drops temp)
Insulated Lid

Other
'Brewtree' - 1825H 1000W 400D (1975H with vessel)
OMAC Drago burner + variable regulator
Bungs
Stirplate
Assembly Instructions
 

Attachments

  • BITS.jpg
    BITS.jpg
    180.1 KB · Views: 158
  • BK IN.jpg
    BK IN.jpg
    156.9 KB · Views: 159
  • BK OUT.jpg
    BK OUT.jpg
    183.4 KB · Views: 152
  • CHILLER.jpg
    CHILLER.jpg
    237.1 KB · Views: 152
  • HLT IN.jpg
    HLT IN.jpg
    178.7 KB · Views: 147
  • HLT OUT.jpg
    HLT OUT.jpg
    150.7 KB · Views: 146
  • MT IN.jpg
    MT IN.jpg
    182.5 KB · Views: 145
  • MT OUT.jpg
    MT OUT.jpg
    178.3 KB · Views: 145
  • TREE 1.jpg
    TREE 1.jpg
    264.8 KB · Views: 150
  • TREE 2.jpg
    TREE 2.jpg
    267.6 KB · Views: 153
Still an extract brewer looking to switch to AG so I've got a couple of absolutely rookie questions.

1) How do you get the liquid from the boiler into a fermentor?
2) Does it come with sparging equipment?
3) Is there any other equipment I would need before I could put on a brew?
 
g'day
1) I had the stand setup at the back of a deck, so had the height to transfer, or you could use a pump
2) I've always batch sparged with no issues
3) Really depends on your process, you might need a few bits and pieces like a paddle or an Erlenmeyer flask to make starters, but you might already have these?
cheers
 

Latest posts

Back
Top