• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Brew Gear for sale: Melbourne

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Lot 1

AG Set up complete:
(estimated value $2400)

Winter Brew Box thermostat & head pad: $70 slcmorro
Grain Mill: Barley Crusher with large 7lb hopper : $150 Manticle
Bottle Drying Rack & S/s Drip tray: $60
20L fermenter with stick on thermometer: $8
28L fermenter with stick on thermometer : $10 slcmorro
30L fermenter with stick on thermometer:$10 slcmorro
5L glass demijohn with stick on thermometer :$10 Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300) $70
20L: HLT pail, lagging jacket & tap: $25
20L lauter tun, lagging jacket, tap, false bottom: $70
4 ring burner, regulator, swap & go gas cylinder: $130 (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched): $120
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : $250
0.00-200.00 hop scales: $10
Refractometer :$50 (MartinOC)
Hydrometer: $8
Ph Meter + calibrating solutions: $50
Rotating sparge arm : $45 Charst
Hand held element 2200w, thermostat & timer plug: $180 Manticle
Box of brewing salts (opened 1kg bags) + storage box: $25 MartinOC
Dextrose 8.5 x 1kg bags: $25 slcmorro
s/s air stone & aeration pump: $40 (Yob)
Immersion Chiller & hoses -$120 Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker :$10
3 x 1kg LDME :$15 slcmorro

Assorted odds and ends: $75 the lot or:

2L glass starter bottle: $5
Meat thermometer: $5
Glass stick themometer: $5
Funnel, bottling wand and plastic mash spoon: $5
6 x rubber bungs: $5
Grain shovel: $2
Sanitary/ethanol swabs, 1 kg sodium percarbonate, 2 x full bottle Defender, nearly full bottle 88% lactic acid, 3/4 bottle phosphoric acid, 500 mL measuring jug, 4 x sample kits PBW and opend bottle of starsan (forgot how much - maybe 1/3 left?): $30
Small steel mesh strainer: $5
20L plastic bucket: $10
French oak chips: $5
3 x 100 crown seals: $6
7 x plastic test tubes and screw on lids: $5
Bottle Brush: $1
Plastic measuring jug (1 L): $1
Scissors: $1
Hand Capper: $2
Various tap fittings, 4 rolls teflon tape, 4 airlock, snap tap, fermenter tap and small rubber O-rings: $15


Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted


Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. :
 
manticle said:
Lot 1

AG Set up complete:
(estimated value $2400)

Winter Brew Box thermostat & head pad: $70
Grain Mill: Barley Crusher with large 7lb hopper : $150 Manticle
Bottle Drying Rack & S/s Drip tray: $60
20L fermenter with stick on thermometer: $8
28L fermenter with stick on thermometer : $10
30L fermenter with stick on thermometer:$10
5L glass demijohn with stick on thermometer :$10 Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300) $70
20L: HLT pail, lagging jacket & tap: $25
20L lauter tun, lagging jacket, tap, false bottom: $70
4 ring burner, regulator, swap & go gas cylinder: $130 (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched): $120
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : $250
0.00-200.00 hop scales: $10
Refractometer :$50 (MartinOC)
Hydrometer: $8
Ph Meter + calibrating solutions: $50
Rotating sparge arm : $45 Charst
Hand held element 2200w, thermostat & timer plug: $180 Manticle
Box of brewing salts (opened 1kg bags) + storage box: $25 MartinOC
Dextrose 8.5 x 1kg bags: $25 slcmorro
s/s air stone & aeration pump: $40 (Yob)
Immersion Chiller & hoses -$120 Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker :$10
3 x 1kg LDME :$15 slcmorro

Assorted odds and ends: $75 the lot or:
2L glass starter bottle: $5
Meat thermometer: $5
Glass stick themometer: $5
Funnel, bottling wand and plastic mash spoon: $5
6 x rubber bungs: $5
Grain shovel: $2
Sanitary/ethanol swabs, 1 kg sodium percarbonate, 2 x full bottle Defender, nearly full bottle 88% lactic acid, 3/4 bottle phosphoric acid, 500 mL measuring jug, 4 x sample kits PBW and opend bottle of starsan (forgot how much - maybe 1/3 left?): $30
Small steel mesh strainer: $5
20L plastic bucket: $10
French oak chips: $5
3 x 100 crown seals: $6
7 x plastic test tubes and screw on lids: $5
Bottle Brush: $1
Plastic measuring jug (1 L): $1
Scissors: $1
Hand Capper: $2
Various tap fittings, 4 rolls teflon tape, 4 airlock, snap tap, fermenter tap and small rubber O-rings: $15

Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted


Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. :
Just updated my purchase preferences. Jumped off the brewbox and fermenters as I don't need them anymore.
 
manticle said:
Lot 1

AG Set up complete:
(estimated value $2400)

Winter Brew Box thermostat & head pad: $70 slcmorro
Grain Mill: Barley Crusher with large 7lb hopper : $150 Manticle
Bottle Drying Rack & S/s Drip tray: $60
20L fermenter with stick on thermometer: $8
28L fermenter with stick on thermometer : $10 slcmorro
30L fermenter with stick on thermometer:$10 slcmorro
5L glass demijohn with stick on thermometer :$10 Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300) $70
20L: HLT pail, lagging jacket & tap: $25
20L lauter tun, lagging jacket, tap, false bottom: $70
4 ring burner, regulator, swap & go gas cylinder: $130 (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched): $120
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : $250
0.00-200.00 hop scales: $10
Refractometer :$50 (MartinOC)
Hydrometer: $8
Ph Meter + calibrating solutions: $50
Rotating sparge arm : $45 Charst
Hand held element 2200w, thermostat & timer plug: $180 Manticle
Box of brewing salts (opened 1kg bags) + storage box: $25 MartinOC
Dextrose 8.5 x 1kg bags: $25 slcmorro
s/s air stone & aeration pump: $40 (Yob)
Immersion Chiller & hoses -$120 Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker :$10
3 x 1kg LDME :$15 slcmorro

Assorted odds and ends: $75 the lot or:
2L glass starter bottle: $5
Meat thermometer: $5
Glass stick themometer: $5
Funnel, bottling wand and plastic mash spoon: $5
6 x rubber bungs: $5
Grain shovel: $2
Sanitary/ethanol swabs, 1 kg sodium percarbonate, 2 x full bottle Defender, nearly full bottle 88% lactic acid, 3/4 bottle phosphoric acid, 500 mL measuring jug, 4 x sample kits PBW and opend bottle of starsan (forgot how much - maybe 1/3 left?): $30 MartinOC
Small steel mesh strainer: $5
20L plastic bucket: $10
French oak chips: $5
3 x 100 crown seals: $6
7 x plastic test tubes and screw on lids: $5
Bottle Brush: $1
Plastic measuring jug (1 L): $1
Scissors: $1
Hand Capper: $2
Various tap fittings, 4 rolls teflon tape, 4 airlock, snap tap, fermenter tap and small rubber O-rings: $15

Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted


Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. :
Added items from the "odds & sods" (unless someone wants to take everything there as a Job-lot?).
 
Must have quoted from an older post. I removed my name from the fermenters and brew box.
 
Hi Manticle/Fr Jack - can I get some details on the immersion chiller, such as length & materials etc? It's probably a bit more $$$ than I had anticipated, and probably much cheaper to make one. Having said that, if it's pretty flash, it might be worth it!
 
Pm me your ph number and I'll send you a photo. I can't get photos off my phone at the moment because technology currently hates me.

Same goes for others interested in a few of the bigger items.
 
Thanks for sending some pics Manticle and cheers for the PM Fr Jack - it's a very nice looking chiller and I reckon I'll grab it!
 
manticle said:
Such a big thing to ask people to fix your computer for free.
I need to take it back to the guy we paid and get what we paid for or a refund but if it doesn't work out I'll post in a separate topic.
Well pm me if you need help. Might be able to sort it remotely.. No big deal really. I always figure that oneday I will need a favour and then someone will help me out...
 
Cheers. Using it at the moment and it seems to be behaving.

2 offers from techs to help. Much appreciated guys.
 
Lot 1

AG Set up complete:
(estimated value $2400)

Winter Brew Box thermostat & head pad: $70 slcmorro
Grain Mill: Barley Crusher with large 7lb hopper : $150 Simon O'Halloran (melbourne Brewers)
Bottle Drying Rack & S/s Drip tray: $60
20L fermenter with stick on thermometer: $8
28L fermenter with stick on thermometer : $10 slcmorro
30L fermenter with stick on thermometer:$10 slcmorro
5L glass demijohn with stick on thermometer :$10 Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300) $70
20L: HLT pail, lagging jacket & tap: $25
20L lauter tun, lagging jacket, tap, false bottom: $70
4 ring burner, regulator, swap & go gas cylinder: $130 (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched): $120
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : $250
0.00-200.00 hop scales: $10
Refractometer :$50 (MartinOC)
Hydrometer: $8
Ph Meter + calibrating solutions: $50: AndyD
Rotating sparge arm : $45 Charst
Hand held element 2200w, thermostat & timer plug: $180 Manticle
Box of brewing salts (opened 1kg bags) + storage box: $25 MartinOC
Dextrose 8.5 x 1kg bags: $25 slcmorro
s/s air stone & aeration pump: $40 (Yob)
Immersion Chiller & hoses -$120 Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker :$10
3 x 1kg LDME :$15 slcmorro

Assorted odds and ends: $75 the lot or: AndyD for the lot
2L glass starter bottle: $5
Meat thermometer: $5
Glass stick themometer: $5
Funnel, bottling wand and plastic mash spoon: $5
6 x rubber bungs: $5
Grain shovel: $2
Sanitary/ethanol swabs, 1 kg sodium percarbonate, 2 x full bottle Defender, nearly full bottle 88% lactic acid, 3/4 bottle phosphoric acid, 500 mL measuring jug, 4 x sample kits PBW and opend bottle of starsan (forgot how much - maybe 1/3 left?): $30
Small steel mesh strainer: $5
20L plastic bucket: $10
French oak chips: $5
3 x 100 crown seals: $6
7 x plastic test tubes and screw on lids: $5
Bottle Brush: $1
Plastic measuring jug (1 L): $1
Scissors: $1
Hand Capper: $2
Various tap fittings, 4 rolls teflon tape, 4 airlock, snap tap, fermenter tap and small rubber O-rings: $15

Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted


Lot 4: $400

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. : AndyD
 
Lot 1

AG Set up complete:
(estimated value $2400)

Winter Brew Box thermostat & head pad: $70 slcmorro
Grain Mill: Barley Crusher with large 7lb hopper : $150 Simon O'Halloran (melbourne Brewers)
Bottle Drying Rack & S/s Drip tray: $60
20L fermenter with stick on thermometer: $8
28L fermenter with stick on thermometer : $10 slcmorro
30L fermenter with stick on thermometer:$10 slcmorro
5L glass demijohn with stick on thermometer :$10 Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300) $70
20L: HLT pail, lagging jacket & tap: $25
20L lauter tun, lagging jacket, tap, false bottom: $70
4 ring burner, regulator, swap & go gas cylinder: $130 (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched): $120
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : $250
0.00-200.00 hop scales: $10
Refractometer :$50 (MartinOC)
Hydrometer: $8
Ph Meter + calibrating solutions: $50: AndyD
Rotating sparge arm : $45 Charst
Hand held element 2200w, thermostat & timer plug: $180 Manticle
Box of brewing salts (opened 1kg bags) + storage box: $25 MartinOC
Dextrose 8.5 x 1kg bags: $25 slcmorro
s/s air stone & aeration pump: $40 (Yob)
Immersion Chiller & hoses -$120 Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker :$10 Charlie Hall (Melbourne Brewers)
3 x 1kg LDME :$15 slcmorro

Assorted odds and ends: $75 the lot or: AndyD for the lot
2L glass starter bottle: $5
Meat thermometer: $5
Glass stick themometer: $5
Funnel, bottling wand and plastic mash spoon: $5
6 x rubber bungs: $5
Grain shovel: $2
Sanitary/ethanol swabs, 1 kg sodium percarbonate, 2 x full bottle Defender, nearly full bottle 88% lactic acid, 3/4 bottle phosphoric acid, 500 mL measuring jug, 4 x sample kits PBW and opend bottle of starsan (forgot how much - maybe 1/3 left?): $30
Small steel mesh strainer: $5
20L plastic bucket: $10
French oak chips: $5
3 x 100 crown seals: $6
7 x plastic test tubes and screw on lids: $5
Bottle Brush: $1
Plastic measuring jug (1 L): $1
Scissors: $1
Hand Capper: $2
Various tap fittings, 4 rolls teflon tape, 4 airlock, snap tap, fermenter tap and small rubber O-rings: $15
Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted


Lot 4: $400

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. : AndyD
 
OK time to get he ball rolling on this. If we wait to get it all accounted for then people may get sick of waiting.

So - if you have put your name down next to something and are still interested in a purchase, PM me.
FJ has asked me to hang onto cash until I have a bit of a lump sum to pass on- I'm advertising that here so no-one thinks it's dodgy when I give my account details for deposits. I'm easily found.

Cheers
 
manticle said:
Lot 1

AG Set up complete:
(estimated value $2400)

Winter Brew Box thermostat & head pad: $70
Grain Mill: Barley Crusher with large 7lb hopper : $150 Simon O'Halloran (melbourne Brewers)
Bottle Drying Rack & S/s Drip tray: $60
20L fermenter with stick on thermometer: $8
28L fermenter with stick on thermometer : $10
30L fermenter with stick on thermometer:$10
5L glass demijohn with stick on thermometer :$10 Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300) $70
20L: HLT pail, lagging jacket & tap: $25
20L lauter tun, lagging jacket, tap, false bottom: $70
4 ring burner, regulator, swap & go gas cylinder: $130 (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched): $120
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : $250
0.00-200.00 hop scales: $10
Refractometer :$50 (MartinOC)
Hydrometer: $8
Ph Meter + calibrating solutions: $50: AndyD
Rotating sparge arm : $45 Charst
Hand held element 2200w, thermostat & timer plug: $180 Manticle
Box of brewing salts (opened 1kg bags) + storage box: $25 MartinOC
Dextrose 8.5 x 1kg bags: $25 slcmorro
s/s air stone & aeration pump: $40 (Yob)
Immersion Chiller & hoses -$120 Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker :$10 Charlie Hall (Melbourne Brewers)
3 x 1kg LDME :$15 slcmorro

Assorted odds and ends: $75 the lot or: AndyD for the lot
2L glass starter bottle: $5
Meat thermometer: $5
Glass stick themometer: $5
Funnel, bottling wand and plastic mash spoon: $5
6 x rubber bungs: $5
Grain shovel: $2
Sanitary/ethanol swabs, 1 kg sodium percarbonate, 2 x full bottle Defender, nearly full bottle 88% lactic acid, 3/4 bottle phosphoric acid, 500 mL measuring jug, 4 x sample kits PBW and opend bottle of starsan (forgot how much - maybe 1/3 left?): $30
Small steel mesh strainer: $5
20L plastic bucket: $10
French oak chips: $5
3 x 100 crown seals: $6
7 x plastic test tubes and screw on lids: $5
Bottle Brush: $1
Plastic measuring jug (1 L): $1
Scissors: $1
Hand Capper: $2
Various tap fittings, 4 rolls teflon tape, 4 airlock, snap tap, fermenter tap and small rubber O-rings: $15
Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted


Lot 4: $400

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. : AndyD
I fixed it, again. I took my name off some stuff earlier, but someone quoted from an older post so my name got stuck back on. The above should be accurate.
 
still a couple of bits to move, due to being stuck for spondulas... i decided to pull my finger out

1) 36L s/s boiler with removable s/s pick up tube ball valve and tailpiece and associated m/f fittings $300
2) 20L s/s mash tun $140

both pots excellent quality, good thick bases, sandwiched aluminium diffusers in stainless bottoms

3) custom made drying rack, 3 shelves and stainless drop tray, holds 60 bottles or other brew gear for drip dry.

4) I think i have about 300 bottles... $60 (just to pay for the wheelie tubs theyre stored in)

5) Brewfridge $70 mashmaster tempmate fitted



6) Timber Shed with colourbond roof (cost $1500) make a reasonable offer
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble & reassemble.
 
bump... i need to shift this stuff (2 posts up) ... landlord is knocking the house so i gotta move very soon
 
hi... the base in that pot is shit... dont buy it for brewing (regardless if you buy mine or not) you will scorch your wort. that pot is 1mm thick. mine is a 6mm base with aluminium layer sandwiched between steel to diffuse heat (spread it around) it cost circa 200 new nearly 10 years ago, i only used it once a month for brewing (just as a mash tun) its as good as new and highly lightly to outlive me. Feel free to PM me with a lower offer and ill certainly consider it. Thanks for your interest Krausen and happy brewing.
 

Latest posts

Back
Top