BNE Gear for sale: fridges, kegs, etc (Warning: lots of pics)

[rockin49]

Hi All,

I'm scaling back my operation after only brewing 2 batches in 3 years and have the following for sale. Please pm me if you have any questions or interested.



[SIZE=11pt]2-way co2 one-direction ball valves (unused)[/SIZE]


[SIZE=11pt]50ml glass pippets (unused)[/SIZE]



Kegs on Legs 6.8kg co2 bottle (10% full)



[SIZE=11pt]20l HDPE cubes[/SIZE]


[SIZE=11pt]SS drip tray[/SIZE]





23l glass carboys w/ carry handles (used a few times)


[SIZE=11pt]Carboy bottle brush[/SIZE]


[SIZE=11pt]Glass carboy silicon bungs (unused)[/SIZE]


[SIZE=11pt]John Guest in-line valves (used once)[/SIZE]


[SIZE=11pt]keg washer[/SIZE]



Ball lock kegs. These come with 4 post and 1 lid replacement seal each and hold pressure. 1 also comes with new poppets. There's one (pictured) which has slight rust in the bottom near opening of dip tube. Was there when I bought it and given no issues. Could probably remove with caustic cleaner.

















[SIZE=11pt]4-way co2 manifold[/SIZE]



Perlick SS 525 taps (1 unused)



[SIZE=11pt]Valve for glass pippets (unused)[/SIZE]


30l Plastic fermenter




Quick disconnects


Racking cane


F&P H215 freezer. Comes with temp controller and can fit 4 kegs (5 on hump with collar). Have routed temp probe through bottom. Some work needed to route gas and attach fan. Also slight issue with lid spring - could be fixed with a bit of attention.






F&P H220 freezer. Comes with temp controller.




[SIZE=11pt]Micro-matic co2 regulator[/SIZE]


[SIZE=11pt]SS 4" shanks[/SIZE]




Plastic collars


SS collars


[SIZE=11pt]Swivel nut kit (barb is stainless and nut is chromed)[/SIZE]


Tap handles


Tap spanner

 

[Batz]

What size tubing do the [SIZE=11pt]John Guest in-line valves take? If it's 5/16" , 8mm I'll take them.[/SIZE]

 

[slcmorro]

PM'ed re taps and gear.

 

[rockin49]

What size tubing do the [SIZE=11pt]John Guest in-line valves take? If it's 5/16" , 8mm I'll take them.[/SIZE]

Hi.. yes they're for 8mm tubing. Have pm'd.

 

[Batz]

Great I'll take them, have not found 8mm ones before. Others seem to be 3/8", and then you need an adapter to go to 8mm.

 

[mattyh77]

Would you post to Sydney the CO2 two way ball valve? Pm me with cost.

 

[GibboQLD]

Where abouts in Brisbane? Keen on both pipettes and the pipette bulb.

 

[rockin49]

Pms sent.

 

[LiquidGold]

Keen for a glass carboy. Location?

 

[rockin49]

Keen for a glass carboy. Location?

Pm sent.

 

[rockin49]

Updated List. The following is left:

Qty Status Description Cost (each)
7 20l HDPE cubes 5
2 23l glass carboys w/ carry handles (used a few times) 50
1 Reserved 2-way co2 one-direction ball valves (unused) 20
2 30l Plastic fermenter 10
1 4-way co2 manifold 45
2 Reserved 50ml glass pippets (unused) 10
1 Ball lock kegs - this is the one with the bit of rust near dip tube (see pic) 70
1 Carboy bottle brush 5
2 Glass carboy silicon bungs (unused) 3
4 Reserved John Guest in-line valves (used once) 5
1 Kegs on Legs 6.8kg co2 bottle (10% full) 250
1 Reserved Perlick SS 525 taps (1 unused) 50
12 Plastic tap collars 1
1 Racking cane 3
1 SS drip tray 40
1 Temp controlled chest freezer H215 - rectangle 150
1 Reserved Valve for glass pippets 3

 

[goatchop41]

Have PM'd you re: payment for that remaining tap

 

[PhilipB]

Sold on the two fermenters

Will message you

 

[PhilipB]

Hi Rockin,

I would like to arrange collecting the fermenters tonight.

Can you message me an address and contact number please.

Phil

 

[rockin49]

Good to see you this arvo Phil. Good luck with the fermenters!

Updated list:

Qty Status Description Cost (each)
7 20l HDPE cubes 5
2 23l glass carboys w/ carry handles (used a few times) 50
1 4-way co2 manifold 45
1 Ball lock kegs - this is the one with the bit of rust near dip tube (see pic) 70
1 Carboy bottle brush 5
2 Glass carboy silicon bungs (unused) 3
4 Reserved John Guest in-line valves (used once) 5
1 Kegs on Legs 6.8kg co2 bottle (10% full) 250
12 Plastic tap collars 1
1 Racking cane 3
1 SS drip tray 40
1 Reserved Temp controlled chest freezer H215 - rectangle 150

 

[Dickster86]

Keen on taking one of the chest freezers off your hands. I want to start using my kegerator for serving beer not fermenting it. Where are you located though?

 

[slcmorro]

Goods received. Recommend the seller to anyone, great communication and extreme care in packaging for freight.

 

[mattyh77]

As per post above. Goods received and packaged well. Being put to good use now. Thanks

 

[kwinchee]

Ill take both the 23lt carboys! Pm me a location and a time

 

[rockin49]

Thanks All. PM sent, kwinchee.