Hez
Well-Known Member
- Joined
- 9/6/17
- Messages
- 206
- Reaction score
- 49
Hi,
Last year I made my first Witbier (belgian style wheat beer), I was quite happy with the result and it was very successful, everyone who tasted loved it, but let's be honest, it wasn't a very good beer. It was too silky/oily, not acidic enough, not dry enough and a little bland (I was too cautious with the spices).
Original post: https://aussiehomebrewer.com/threads/biab-witbier-blanche-belgian-wheat-beer.96040/
So for my next version I will:
- reduce the amount of flaked oats (too oily)
- adapt it to my new efficiency
- increase a tiny little bit the spices (without going too crazy, still subtle, keep in mind I'm using fresh peel wich is heavier than the dry one and chinese coriander which has much less aroma than the indian one, but that's what I have).
- use East Kent Goldings instead of the usual hops for this beer. This is not an improvement, it's just because that's what I have right now in the fridge and I want to use them... this beer is not hoppy, they are only for bitterness, I know "thinking all hops for bitterness are the same is ludicrous", but with the spices and this yeast I don't think they won't leave any noticeable aroma at all and even if they did, they are from the same family as the noble hops and the styrian goldings, so... whatever...
- added the water adjustments (new!)
- added the fermentation temperature control (new!)
P.S. I use an immersion chiller discarding the first bucket of water and recirculating with a pond pump to the coldest I can and then transfer to the fermenter and finish chilling into the fridge before pitching the yeast. This time I plan on keeping the spices inside the kettle (using a hop sock) until I transfer the wort to the fermenter. Last time I removed them just after boil.
So... my questions are about the "new" stuff for me:
1.- Do you think this water adjustments are alright?
2.- Do you think the fermentation temp is alright?
3.- What would you change (from all the recipe)?
GRAIN:
50% Flaked wheat
45% Pilsner
5% Flaked Oats
12L batch (including trub)
75% efficiency
SRM: 3.48 ; EBC: 6.85
Preboil OG: 1.032
OG: 1.050
FG: 1.014 -> ABV: 4.73%
FG: 1.012 -> ABV: 5.09%
BOIL:
60' 12g East Kent Goldings 5.1%AA
10' 1.1g Gypsum/Calcium Sulphate/CaSO4
10' 0.8g Calcium Chloride/CaCl2
05' 10g fresh seville orange peel
05' 5g fresh grapefruit peel
05' 10g chinese coriander (roasted and crushed)
IBU: 15.21
MASH:
30' at 48.8º (protein rest)
60' at 66º (saccharification)
10' at 75.5º (mash out)
Sparge at 75.5º
FERMENT:
Belgian Wit Ale Yeast WLP400 74-78% Low-Med 19.5ºC-23.3ºC Medium
20º for 3 days -> 22º until finish
WATER ADJUSTMENTS:
Add Gypsum/Calcium Sulphate/CaSO4, Calcium Chloride/CaCl2 and Lactic Acid 88% to mash and sparge water to:
Ca: 66 <- Palmer's recommended range 50-150
Mg: 23 <- Palmer's recommended range 10-30
Na: 16 <- Palmer's recommended range 0-150
Cl: 71 <- Palmer's recommended range 0-250
SO4: 79 <- Palmer's recommended range 50-350
Cl to SO4 Ratio: 0,90 <- .77 to 1.3 = Balanced
Estimated pH (room temp): 5,32 <- Palmer's recommended range 5.4-5.6
Last year I made my first Witbier (belgian style wheat beer), I was quite happy with the result and it was very successful, everyone who tasted loved it, but let's be honest, it wasn't a very good beer. It was too silky/oily, not acidic enough, not dry enough and a little bland (I was too cautious with the spices).
Original post: https://aussiehomebrewer.com/threads/biab-witbier-blanche-belgian-wheat-beer.96040/
So for my next version I will:
- reduce the amount of flaked oats (too oily)
- adapt it to my new efficiency
- increase a tiny little bit the spices (without going too crazy, still subtle, keep in mind I'm using fresh peel wich is heavier than the dry one and chinese coriander which has much less aroma than the indian one, but that's what I have).
- use East Kent Goldings instead of the usual hops for this beer. This is not an improvement, it's just because that's what I have right now in the fridge and I want to use them... this beer is not hoppy, they are only for bitterness, I know "thinking all hops for bitterness are the same is ludicrous", but with the spices and this yeast I don't think they won't leave any noticeable aroma at all and even if they did, they are from the same family as the noble hops and the styrian goldings, so... whatever...
- added the water adjustments (new!)
- added the fermentation temperature control (new!)
P.S. I use an immersion chiller discarding the first bucket of water and recirculating with a pond pump to the coldest I can and then transfer to the fermenter and finish chilling into the fridge before pitching the yeast. This time I plan on keeping the spices inside the kettle (using a hop sock) until I transfer the wort to the fermenter. Last time I removed them just after boil.
So... my questions are about the "new" stuff for me:
1.- Do you think this water adjustments are alright?
2.- Do you think the fermentation temp is alright?
3.- What would you change (from all the recipe)?
GRAIN:
50% Flaked wheat
45% Pilsner
5% Flaked Oats
12L batch (including trub)
75% efficiency
SRM: 3.48 ; EBC: 6.85
Preboil OG: 1.032
OG: 1.050
FG: 1.014 -> ABV: 4.73%
FG: 1.012 -> ABV: 5.09%
BOIL:
60' 12g East Kent Goldings 5.1%AA
10' 1.1g Gypsum/Calcium Sulphate/CaSO4
10' 0.8g Calcium Chloride/CaCl2
05' 10g fresh seville orange peel
05' 5g fresh grapefruit peel
05' 10g chinese coriander (roasted and crushed)
IBU: 15.21
MASH:
30' at 48.8º (protein rest)
60' at 66º (saccharification)
10' at 75.5º (mash out)
Sparge at 75.5º
FERMENT:
Belgian Wit Ale Yeast WLP400 74-78% Low-Med 19.5ºC-23.3ºC Medium
20º for 3 days -> 22º until finish
WATER ADJUSTMENTS:
Add Gypsum/Calcium Sulphate/CaSO4, Calcium Chloride/CaCl2 and Lactic Acid 88% to mash and sparge water to:
Ca: 66 <- Palmer's recommended range 50-150
Mg: 23 <- Palmer's recommended range 10-30
Na: 16 <- Palmer's recommended range 0-150
Cl: 71 <- Palmer's recommended range 0-250
SO4: 79 <- Palmer's recommended range 50-350
Cl to SO4 Ratio: 0,90 <- .77 to 1.3 = Balanced
Estimated pH (room temp): 5,32 <- Palmer's recommended range 5.4-5.6