• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

bench + HLT with heating element + fermenters

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dan_Fr

Member
Joined
30/7/18
Messages
8
Reaction score
1
Location
Sydney
Selling due to move (leaving in 1 week !). Located in Sydney (inner west), NSW.
************
$180 Brewing bench
Painted steel with marine grade aluminum sheet (resistant to corrosion). The top aluminum sheet stands on welded plain bars, so it is ultra resistant. I used the bottom sheet to hold my pumps, my counterflow chiller etc. There is a side bench on which I put the burner (seen on the right side of the pictures). This bench will last longer than you :) Comes the half-full gas bottle and the burner (one leg of the burner has be fixed/welded).
Size: 160cm length x 50cm width x 63cm height
*************
3 Clean fermenters
$15 each, $40 for the 3
*************
$40 HLT
The 30L stainless kettle comes with a 2200W heating element + cable (for security, the outlet should be sealed in a waterproof junction box), and a home-made insulation jacket. There are two holes, both 1/2" (I used one for the valve and the other for a thermowell). Add an extra $50 if you want the valve and the thermowell.
*************
bench1.jpg
bench2.jpg
20210406_181446.jpg
HLT.png
 
Last edited:
Back
Top