One step closer to using mine.
Thought I post some pics of how I've got mine plumbed.
The original plan was to use the 1/4" flare to 1/4" male NPT fitting I bought especially (so I didn't have to buy the entire accessory kit) with a flared disconnect for the gas line. However seems the 1/4" fitting on the barb connection of the 1/4" flared disconnect don't marry with the adaptor I bought.
Searching through the parts at my disposal I found an old 3/8" (i think) adaptor to flare fitting that I used to use on a gas line or something. It fitted nicely with the 1/4" to 3/8" (i think) adaptor I also had. So that is my gas line connection.
The unit is now cleaning and sterlising (they obviously come straight from the workshop) as there is the typical metal work residue over the unit.
The other thing with mine is the silicon stopper at the bottom of the gun is split on mine. I contacted iBrew and they are shipping me a replacement. Something to check when you guys get yours.
Depending on how I pull up from the game this arvo (c'mon the Eels) I may test drive it tonight, otherwise tomorrow night. I'll report futher then.
Beers,
Doc