BeerFingers - 1.5Kg Amarillo SMaSH IPA

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

big78sam

Frequent poster - My post count is no reflection o
Joined
15/11/08
Messages
834
Reaction score
41
Lol Sam...

Clearly you dont know BF too well...

I cant wait to see a post whirlpool pic...

Do you have enough stockings... What dod the woolies chick say when you cleared the shelf out.

Just jokes mate. Cant wait to see it but :-D
 
Are you sure or is your hop amount out 1 decimal point?

If you brew an extract you might just surprise yourself.
http://www.aussiehomebrewer.com/forum/inde...showtopic=36160

I'm Positive
Code:
Ingredients:

------------

Amount		 Item									   Type		% or IBU	 

8.00 kg		Pale Malt, Ale (Barrett Burston) (5.9 EBC) Grain	   100.0 %	  

1500.00 gm	 Amarillo [8.50%]  (15 min)				 Hops		669.8 IBU	

1 Pkgs		 California Ale (White Labs #WLP001)		Yeast-Ale

yeast will be in a 2L starter.
So there will be some extract in there :D
 
**** - you must have one hell of a hard on for amarillo BF!
 
Do you have enough stockings... What dod the woolies chick say when you cleared the shelf out.

Just jokes mate. Cant wait to see it but :-D

yeah, I'm figuring making up stockings of 150g each added each minute for 10 minutes.
only because adding 1.5kg in one hit will kill the boil.

Why stockings? because i can squeeze them out and not lose 7L of wort to hops.

might need some rubber gloves for that though.
Walking out with 5 pairs of stockings and a pair of rubber gloves might raise some eyebrows :p

Will take plenty of pics on brewday ;)
 
**** - you must have one hell of a hard on for amarillo BF!

Yeah, I reckon I'll be over Amarillo by the time I get to the bottom of the keg.
Might bottle half of it though and put it away for a few months to settle.
 
Wow. That is a huge amount of hops. You would hope you don't get an infection in that batch.
 
Wow. That is a huge amount of hops. You would hope you don't get an infection in that batch.

Mine is only a Lightly hopped one.
I'm Pretty sure Doomed did a 3kg Brew a while back.

Nevertheless, It will be babied like no other....

IMG_20120523_223714.jpg
 
Lol Sam...

Clearly you dont know BF too well...

I cant wait to see a post whirlpool pic...

Do you have enough stockings... What dod the woolies chick say when you cleared the shelf out.

Just jokes mate. Cant wait to see it but :-D


theres a rumor that andy likes to wear the stockings first isnt there ben.
so its not a complete waste.
fergi :drinks:
 
yeah, I'm figuring making up stockings of 150g each added each minute for 10 minutes.
only because adding 1.5kg in one hit will kill the boil.

Why stockings? because i can squeeze them out and not lose 7L of wort to hops.

might need some rubber gloves for that though.
Walking out with 5 pairs of stockings and a pair of rubber gloves might raise some eyebrows :p

Will take plenty of pics on brewday ;)
Rather than squeeze your bag too much you could adjust your software to allow for the extra losses expected.
 
I also have a 10min SMaSH IPA planned and in stock that I will post about in a few weeks.
20L batch
8kg Pale malt
1.5Kg of Amarillo @10min
OG 1095
IBU 670

I'm Positive
BeefyFingers said:
Ingredients:
------------
Amount Item Type % or IBU
8.00 kg Pale Malt, Ale (Barrett Burston) (5.9 EBC) Grain 100.0 %
1500.00 gm Amarillo [8.50%] (15 min) Hops 669.8 IBU
1 Pkgs California Ale (White Labs #WLP001) Yeast-Ale

Mooted said:
Wanna review that positivity? Mate you don't know what you're on about.
 
Rather than squeeze your bag too much you could adjust your software to allow for the extra losses expected.

Nah, my hop screen wouldn't be able to cope with that amount of loose pellets and there's no way it would get through the plate chiller. So it'll have to go into stockings anyway. May as well squeeze them a bit to recover.

I'm thinking of 2x mash of 4kg each to push my efficiency up then if i need to I can add water to bring it up to the right OG.
 
Wanna review that positivity? Mate you don't know what you're on about.

Yep, also had the wrong AA levels in there.

Code:
Recipe Specifications

--------------------------

Batch Size: 20.00 L	  

Boil Size: 29.46 L

Estimated OG: 1.095 SG

Estimated Color: 14.3 EBC

Estimated IBU: 615.1 IBU

Brewhouse Efficiency: 75.0 %

Boil Time: 90 Minutes



Ingredients:

------------

Amount		 Item									   Type		% or IBU	 

8.00 kg		Pale Malt, Ale (Barrett Burston) (5.9 EBC) Grain	   100.0 %	  

1500.00 gm	 Amarillo [10.10%]  (10 min)				Hops		615.1 IBU	

1 Pkgs		 California Ale (White Labs #WLP001) [StarteYeast-Ale				





Mash Schedule: Single Infusion, Light Body, Batch Sparge

Total Grain Weight: 8.00 kg

----------------------------

Name				Description					   Step Temp	 Step Time	 

Mash In			 Add 20.86 L of water at 67.8 C	62.0 C		75 min
 
Nah, my hop screen wouldn't be able to cope with that amount of loose pellets and there's no way it would get through the plate chiller. So it'll have to go into stockings anyway. May as well squeeze them a bit to recover.

I'm thinking of 2x mash of 4kg each to push my efficiency up then if i need to I can add water to bring it up to the right OG.
I'd still be using the hop stockings either way.

And where is the other pound of hops? You sleeping with them under your pillow?
 
I'd still be using the hop stockings either way.

For sure.
Have PM'd Doom about it all, he's replied but haven't properly read it yet.
Efficiency drops, really large losses to hops etc is all new stuff to me.
Having never done something with such a big OG and because I don't use BS properly enough to allow for the changes, i'm kinda doing it via careful planning (AKA: Seat of my pants).
But at the cost of this brew, I don't want it to **** out so much that it's undrinkable.

And where is the other pound of hops? You sleeping with them under your pillow?

I don't know if there's an equivalent to "Chroming" when it comes to hops.
I have laced my coffee with pellets and dry hopped my lemonade with them in the glass.
But most of the time I just bury my nose into the bag as often as I can.
I will probably use them in a Rogers Beer type clone.

This years Amarillo is amazing!
 
I also have a 10min SMaSH IPA planned and in stock that I will post about in a few weeks.
20L batch
8kg Pale malt
1.5Kg of Amarillo @10min
OG 1095
IBU 670

BeerFingers


What if it turns out less drinkable than your pale ale K&K?
Fair chance it will, if you ask me :ph34r: :ph34r:
 
Back
Top