Beer Out Post

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mashout

Member
Joined
22/12/11
Messages
23
Reaction score
0
looking at making a line cleaner and want to screw in a lump end into a cornelius keg out post but cant find the right size at the local hardware and have to order online does anybody know what thread this is thanks
 
Challenger vi found site says 5/8 but did the rounds yesterday of 4 places couldn't find the right thread type are they imperial maybe??
 
American kegs = Imperial sizing I would imagine.
 
Worse than being Imperial which is fairly available they are a strange American thread called UNF, Its a bit like Gas Gauge, an extra fine thread that is used in specialised work where they dont want the public joining stuff up to it. Sometimes you can get parts from specialised fastener or plumbing suppliers.
Corny Kegs are 0.594 NUF
Firestone are 9/16 UNF
There were adaptors available at one time to convert from Cornelius to BSP for use as washout kegs with line valve connectors think there might even be a couple in my miscellaneous parts box defiantly Corny tho.
Mark
 
Most of the Firestone vi Challenger are fitted:

Liquid 5/8" - 18

Gas 9/16" - 18

the "18" is threads per inch, rated as UNF (Unified Fine) as Mark said, any light machinery place should be able to help.

Hope this makes sense.

Martin
 
CHI Company in US has lots of spares for all keg types, have used them for keg repairs.

Was recently a thread on poor service by this mob, have had no problems myself.
 
Back
Top