• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

AG & Keezer Gear for sale

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

metro embalming brewery

Active Member
Joined
31/7/14
Messages
37
Reaction score
3
Ok folks im selling up everything. I was hoping there would have still been pics of my rig on here but apparently not. Its all of Citymorgue2's gear. Its made comp winning beer thats made it to nationals and made plenty of beers for the Melbourne Brewers

3V AG rig. 50L HLT, 50L MT and ~80L kettle. The HLT needs a new element. its currently wired for 3600W.
2 pumps (1 march pump), herms (PID unit needs rewiring as it only reads temp, it wont actually do the step mash). silicone hosing, 3 piece ball valves etc
23jet mongolian burner with reg
500L chest freezer - 4 or 5 years old. Had it from new.
6 celli stainless flow control taps (they were about $200 each from memory)
about 12 kegs (ball lock)
Fermentors galore including 1x30L glass and 2x60L.
Monstermill setup
Shite loads of grain and hops including racking
copper chiller, PET bottles etc
6.8kg mykegonlegs with regulator
bulk sodium percarb
fittings etc that i can throw in

Eastern suburbs Melbourne. pickup only.

Make me some reasonable offers
 

Attachments

  • grain and racking.jpg
    grain and racking.jpg
    1,000 KB · Views: 1,217
  • mill.jpg
    mill.jpg
    772.8 KB · Views: 1,256
  • keezer etc.jpg
    keezer etc.jpg
    636.4 KB · Views: 1,276
Last edited:
What hops do you have?
You're not selling those barrels, I guess then?

Where about in the East are you? I'm out in Pakenham

Cheers!


Ok folks im selling up everything. I was hoping there would have still been pics of my rig on here but apparently not. Its all of Citymorgue2's gear. Its made comp winning beer thats made it to nationals and made plenty of beers for the Melbourne Brewers

3V AG rig. 50L HLT, 50L MT and ~80L kettle. The HLT needs a new element. its currently wired for 3600W.
2 pumps (1 march pump), herms (PID unit needs rewiring as it only reads temp, it wont actually do the step mash). silicone hosing, 3 piece ball valves etc
23jet mongolian burner with reg
500L chest freezer - 4 or 5 years old. Had it from new.
6 celli stainless flow control taps (they were about $200 each from memory)
about 12 kegs (ball lock)
Fermentors galore including 1x30L glass and 2x60L.
Monstermill setup
Shite loads of grain and hops including racking
copper chiller, PET bottles etc
6.8kg mykegonlegs with regulator
bulk sodium percarb
fittings etc that i can throw in

Eastern suburbs Melbourne. pickup only.

Make me some reasonable offers
 

Attachments

  • 20190313_213642.jpg
    20190313_213642.jpg
    854.2 KB · Views: 391
  • 20190313_213648.jpg
    20190313_213648.jpg
    935.2 KB · Views: 367
Last edited:
ive got an interested person re hops. but in case that falls through here's the rough details

roughly weighed out all the hops and theres just under 11KG
cascade
Us Northern Brewer
Northerndown
magnum
amarillo
Us Hallattau
Columbus
Sazz
US Fuggles
Citra
Galaxy
Styrian Goldings
1st Goldings
El Dorado
Horizon
Challanger
Brambling
Chinook
Sonnet
Spalter

Aus Post estimates $38 postage based on a 40x40x30cm box weighing 11kg from melbourne to Newcastle.

Hops are about $55per kilo if bought by the KG. I'll sell it cheaper than that per KG.
 
Monster mill is gone and 1 keg. Still 11 kegs, keezer etc left.

New pic of inside the keezer is attached.
 

Attachments

  • 20190324_160049.jpg
    20190324_160049.jpg
    1,011.9 KB · Views: 325
How much are you chasing per keg?

Also where abouts are you located?
 
Back
Top