freezkat
Well-Known Member
- Joined
- 16/8/11
- Messages
- 651
- Reaction score
- 2
My kegerator is made out of a pretty old fridge. There are no computer ic parts or transistors.
I want to add a couple 120mm fans inside to keep beer lines from freezing...even up the temp in the box.
My goal is to use a DPDT (form c) cube relay I have in stock. Have the fans cycle when the compressor runs.
The coil is rated 12vdc-28vdc the contacts are rated 240vac. I don't know if the 60Hz cycle makes a difference on a relay.
I have the socket for it. I just need to do some research if there are any low voltage contacts in the thermostat, and if so are they accessible. Will they handle the draw of the fans?
If not I need to get an ac rated relay or fans that will run on ac and just parallel onto the pump motor.
I want to add a couple 120mm fans inside to keep beer lines from freezing...even up the temp in the box.
My goal is to use a DPDT (form c) cube relay I have in stock. Have the fans cycle when the compressor runs.
The coil is rated 12vdc-28vdc the contacts are rated 240vac. I don't know if the 60Hz cycle makes a difference on a relay.
I have the socket for it. I just need to do some research if there are any low voltage contacts in the thermostat, and if so are they accessible. Will they handle the draw of the fans?
If not I need to get an ac rated relay or fans that will run on ac and just parallel onto the pump motor.