• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

5 star elements

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Eagleburger

Well-Known Member
Joined
6/2/14
Messages
493
Reaction score
119
2 complete 2400w kits as pictured. $200 + postage for both. These are the weld in type. If you want weldless, it will be cheaper to get direct.

*as new, unused*

If picking up, will throw in a 82L SS pot. Is fully fitted with sanitary fittings including centre drain on bottom. The fittings were silver soldered with water safe silver copper rod. ie no cadmium.

Note- Topher has first dibs.

20150502_081725.jpg


20150502_081729.jpg
 
I was going to make a 3V but settled on a 1V x 2. I dont need two double batch systems as I only need 2 kegs of swill per fortnight. A single and a double side by side is enough for me, so this is surplus
 
As i said in the pm. I'm definitely in for the elements and will take the pot if i can find a qlder to pick up for me.
 
Back
Top