4 Way Gas Manifold

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Crusty

Well-Known Member
Joined
29/6/08
Messages
2,625
Reaction score
607
Location
Gulmarrad, NSW
Hi guys.
Getting a 4 way gas manifold shortly & need some advice on fitting it out with JG fittings.
Is this the fitting I need for the main gas entry here & can they replace the barbs on each tap for easier connection.
 
Hi guys.
Getting a 4 way gas manifold shortly & need some advice on fitting it out with JG fittings.
Is this the fitting I need for the main gas entry here & can they replace the barbs on each tap for easier connection.

should do the job, as long as the barb fittings you're replacing are 1/4bsp...

have you already bought your manifold?

if not get along to this mob

http://www.ifsaus.com.au/

to create something like this, a fraction of the price of any pre-made manifold you'll find.

IMG_2598.JPG
 
got one like above sitting on the shelf after i upgraded the fridge.
pm me if you get interested in it.
 
I have one the same with six outlets, works good.
 
I know Crusty is covered but this might be useful for others?


Pneumatic, push in, 5 way manifold for 8mm OD line, ~$2.39 AUD delivered from China.
http://www.ebay.com.au/itm/Pneumatic-Push-...=item3f19db895d

Is that what you would call a manifold, though?

For me the one big adavantage a manifold would have is to be able to turn individual lines off and on, while force carbing or other shenanigans.

This one is really just a line splitter. Handy to have a three way splitter though compared to two dual splitter.
 
Yeah, cheap but a bit nasty.
Thanks Nev.

+1 for a bit nasty. I bought the T versions of those fittings being the tight arse that i am but when i sprayed some detergent on the connections there were definitely a few bubbles coming out.
 
Back
Top