squirt in the turns
Well-Known Member
- Joined
- 23/4/10
- Messages
- 281
- Reaction score
- 34
This is a T-shaped 4 tap flooded font. It's used ex-commercial, so there are a few signs of use (a few small scratches and a couple of minor dents in the top and end caps). But overall it is in very good, and most importantly, shiny condition. The sticker, which has mostly peeled off, says "Allied Beer Dispensing Equipment".
It comes with 4 stainless steel tap adaptors, which, after studying the Andale catalogue, appear to be the "lock-in" type. Taps not included.
I've tested it with water at mains pressure and it's sound. You can pump cold water through it from a reservoir in your kegerator for a cold first pour and to get some condensation on the font, or run a glycol chiller to get it to frost up if you're extra fancy (glycol chiller not included).
Lines are approx 1.2 m long.
Selling because I somewhat ambitiously bought 2 and simply don't need this one.
42 cm wide x 42.5 cm tall (this is the height above the bar).
Pickup from Burleigh Heads preferred, but I am willing to post at buyer's expense. To help you calculate post, the dimensions of the package would be around 15 cm x 47 cm x 90 cm, weight is 6.5 kg.
Looking for $215 OBO. Cheers!
It comes with 4 stainless steel tap adaptors, which, after studying the Andale catalogue, appear to be the "lock-in" type. Taps not included.
I've tested it with water at mains pressure and it's sound. You can pump cold water through it from a reservoir in your kegerator for a cold first pour and to get some condensation on the font, or run a glycol chiller to get it to frost up if you're extra fancy (glycol chiller not included).
Lines are approx 1.2 m long.
Selling because I somewhat ambitiously bought 2 and simply don't need this one.
42 cm wide x 42.5 cm tall (this is the height above the bar).
Pickup from Burleigh Heads preferred, but I am willing to post at buyer's expense. To help you calculate post, the dimensions of the package would be around 15 cm x 47 cm x 90 cm, weight is 6.5 kg.
Looking for $215 OBO. Cheers!
