• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Equipment For Sale 3 Vessel Homebrew Setup [SW Vic]

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GumbyOne

Well-Known Member
Joined
8/10/08
Messages
77
Reaction score
0
Hi all, Selling this barely used 3 vessel all grain setup. This started as a lockdown project which I only got around to getting up and running last year. I've done a handful of brews on it but have realised I don't have the time for it these days. The RIMS tube was the last addition to the setup and I never got around to getting it up and running.

Included:
SS Brewtech 15Gal/60L Kettle
- added fitting for whirlpool

SS Brewtech 15Gal/60L HLT
- added 2x2" TC fittings for elements (1x2400w element installed)
- added fittings for sight glass and fill port
- PT100 temp sensor

SS Brewtech InfuSsion Mash Tun 10Gal/40L
- SS recirc manifold
- PT100 temp sensor

Cheeky Peak RIMS tube
- Unused
- 2400W element

65W Kegland mag drive pump
- SS head

Kegland 30 Plate Chiller

23 jet Mongolian Burner
- Metal stand
- LP gas regulator

Control Panel
- 2x PIDs & SSRs (only wired to control HLT and monitor temps on the MT, will need to rejig to use the RIMS. I'll dissassemble this as I put this together and I'm not a qualified sparky :) )

Wood stand on castors
- Integrated plumbing for HLT fill and plate chiller with filter

Silicon Hosing w/ SS Camlock connectors

Fisher & Paykel 450L Fermentation Fridge
- STC1000 Temp controller
- holds 2 plastic fermenters

Mashmaster Millmaster Mill
- Fluted gear driven rollers
- Diy Hopper

Other assorted bits and pieces including
- 2x plastic fermenters
- Various SS fittings
- Refractometer
- Unused Hosing
- 60-70 Coopers long neck bottles
- Bench capper
etc.

Looking for $2000 but open to reasonable offers. Pickup in Timboon but can possibly deliver for a small fee, I'm often in Warrnambool/Colac areas and less often in Geelong. Let me know if you have any questions or want to arrange an inspection.

Cheers!
 

Attachments

  • 2Q0A9054_20241124.jpg
    4.5 MB
  • 2Q0A9053_20241124.jpg
    6.2 MB
  • 2Q0A9051_20241124.jpg
    5 MB
  • 2Q0A9049_20241124.jpg
    4.6 MB
  • 2Q0A9059_20241124.jpg
    4.1 MB
  • 2Q0A9057_20241124.jpg
    3.3 MB
  • 2Q0A9056_20241124.jpg
    4.8 MB

Latest posts

Back
Top