• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

1/4" Ball Valves To Swap

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

timmy

Well-Known Member
Joined
9/6/03
Messages
384
Reaction score
0
I have a heap of 1/4" ss ball valves ( about 10 or 11 i think) that I'm looking to swap for a couple of 1/2" ones.

If you have a few let us know.
 
timmy said:
I have a heap of 1/4" ss ball valves ( about 10 or 11 i think) that I'm looking to swap for a couple of 1/2" ones.

If you have a few let us know.
[post="70929"][/post]​


do u have in pics....

might be able to swapp a couple.
depends on price and availability of 1/4inch BSP Barbs...
 
yep will post some pics.

most are still new in the pack, they are surplus from condenser water gauge lines i was upgrading.

I also have some 1/4" ss compression fittings nipples and barbs to fit.

give me a few mins i'll post some pics of what I have.
 
Sweet - what is the OD and ID of the 1/4" BSP Stuff.

Thanks
 
ok

Providing you can see the picture.

part A 1/4" x 1/4" ss compression fitting I have 10

part B 1/4" x 1/4" x 1/4" Tee i have 10 also

part C 1/4" compression x 1/4" BSP nipple i have 19 spare

and

Part D i have 5 to spare

Edit: Sorry I have no more 1/4" barbs left!!!!!

FITTINGS.jpg
 
ok - i am interested if you want to do some swapping for 1/2inch ball valves.

Let me know.
 
Back
Top