1/2" Blue Bottler / Bottle Filler / Bottling Wand

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Is this 1/2"?

Most of the ones sold in Australia are 3/8".

Need one that is 1/2".

Ah, I see the problem. I did see the measurement but I thought most taps were universal. I'd say probably not, seeing as though it isn't specified it would be the most common 3/8" bottler. It wouldn't hurt to call them and ask if they have any in stock though.
 
Never seen one other than the size to stick into a common white tap, what you are calling 3/8.
Not quite sure why you need but if you just put a short piece of 10mm clear Vinyl Tube over the end, you will be able to force the end of a tube over that might help.
Mark
 
Back
Top