Search results

Update - HERMS Coil and Bottle Tree are gone.... 3 20L Cubes - Free Esky Jocky Box to suit a 9L corny keg. Make an offer

Box of plastic Coopers bottles (about 40 I think). Make an offer Brew bench. This was built as part of a HERMS system I ran with a gas fired kettle. I made it out of steel angle and coated in black Cold Gal. Left side has a high output gas burner (can include the original burner stand...

Hi all - cleaning out the shed and have some unused equipment. Pick up in Wellington Point (Brisbane). I'm not after crazy $$, just hoping someone can get more use out of the gear than I am currently Converted keg for recirculating 1V BIAB system. Keg king element. I probably have a ghetto...

I'm looking to cut the existing temp sensor cable, and soldering the wires onto a new 3.5mm socket and jack (something like this: https://www.jaycar.com.au/3-5mm-stereo-line-socket/p/PS0134 and https://www.jaycar.com.au/3-5mm-stereo-plug/p/PP0130). This is so I can have a short cable length...

1.Aydos - 1 x Gladfields US Ale Malt, 1 x TF MO, 1 x Gladfields Munich 2. LRGI - 1 x Gladfield Pale 3. tj2204 - 1 x BB ale 0.5 x wey Vienna 0.5 bb wheat (both split with fdsaasdf) 4. Zorco - 1 x Glad US Ale, 1 x wey munich 5. Newy - 1 x Gladfield Ale, 1 x Gladfield Pils, 1 x Gladfield US Ale 7...

I really like the look of these. One thing I am wondering though is how do you ensure the section of piping (which is presumably 'internal' to the Brewie) between the kettle and the wort outlet is clean/sanitised before running the chilled wort out?

Up to 8kg according to this: https://m.youtube.com/watch?v=4DWR0na7diM

I'd definitely be interested in a dual SSR!

Hi Sluggerdog - I had the same issue during my first mash, so I increased the integral term in the PID settings from 15 (as originally recommended in Lael's video - but as he said, the values will be dependent on your system) to 30 on my system. My increasing that value, I found it got to temps...

Thanks a lot for the explanation James! I haven't tried to cause the scrambling issue with the case open yet (to see if it's related to the wiring being up close to the PCB). FYI - I'm using a March pump. A couple of pics of the wiring below: Let me know if you think I could make some...

Thanks for the advice real_beer, much appreciated! I will try shortening some of the wiring and hopefully that will help. My 12V wiring could be trimmed a bit as it's quite long to allow the lid to sit beside the box, but the rest is pretty short already. I'll try it and see how it goes...

Having a couple of issues, and wondering if anyone else is experiencing the same.... First is, I think I'm getting the "screen scrambling" due to EMI (?) when the pump switches (mentioned in Lael and James' wiring video). When it happens, a series if jibberish letters run across the display...

This might help if anyone else is trying to mount the temp probe in-line......I picked up a brass plug from the big green shed for $2 and bored out the inside by about 1-2mm on a mates lathe, and drilled a 10mm hole through the top:

I measured the temp probe, and it's 16mm diameter at the base. The internal diameter of the 1/2 inch fittings I had laying around varied between about 13mm and just under 16mm....

1. Fatamorgana - paid + 1 extra probe paid 2. natdene - paid – sent 3. Belter – paid 4. gap - paid - sent, received 5. hubert hophead - paid - 1xspare probe paid - Recieved thanks! 6. barneey – paid 7. ArnieW - paid – sent 8. The Judge - paid - spare probe paid - sent – received 9...

I found the same thing (base of temp probe is too wide to sleeve inside a 1/2 inch fitting) - so I ordered one of these: https://store.brewpi.com/temperature-control/threaded-onewire-temperature-sensor Came to about $30 AUD inc. delivery (slowest shipping, untracked - so might take weeks/months...

I'd be interested in one......it might come in handy to be able to easily connect the Brauduino to a temp sensor which is installed in a T-piece on a HEX or vessel outlet.....

Right, I get it now.....Cheers MB!

Thanks for the info guys - so the RTD probes are a no go with the Brauduino..... So, to get the temp probe which is included with the kit into a T-piece....I haven't seen the temp probe in the flesh (so I'm probably wrong here), but from the photo it looks like the threads are "on the back"...

A question to the electronics gurus out there! I have a couple of these RTD temp sensors from Auber Instruments used in my existing HERMS system: http://www.auberins.com/index.php?main_page=product_info&cPath=20_15&products_id=249 In my existing setup, the sensor is threaded into a stainless...