Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. S

    Where to get a decent beer in Sydney international terminal? ?

    Suggestions? Anything crafty will do!
  2. S

    Expert help needed, no idea what's happened to my CO2.

    Brilliant! Thanks so much, this fixed it instantly! Thought it was very odd, must have got stuck and unscrewed with the removal of the regulator at some point. You're a champ!
  3. S

    Expert help needed, no idea what's happened to my CO2.

    That's what I thought, but how on earth was this even working for the last three months!?
  4. S

    Expert help needed, no idea what's happened to my CO2.

    Have had my kegs going for about three months. Have disconnected and reconnected the regulator from the CO2 bottle a number of times without any problems. I have a Tesuco dual outlet regulator. The other day I disconnected one of the kegs (empty) and turned the gas back on for the other keg...
  5. S

    It's Brew Day! Help With Two Brews

    Sorry that should have been Coopers Amber LME and Coopers Light LME :)
  6. S

    Yoour Bottle Of Choice

    Any of the Gage Road 640ml long necks are awesome. I use a carton of Atomic Pale Ale ones that I picked up cheap :) I reckon this size is just perfect.
  7. S

    It's Brew Day! Help With Two Brews

    Hey guys, I've got two beers to put down today so that I've got something ready to go for Australia Day: Can you guys sanity check the following recipes? Any advice appreciated. Brew One: Hoppy Pale Sessional 6L Boil Coopers Draught Coopers LME 500g LDME 25g Cascade 6.2% @ 30min 25g Cascade...
  8. S

    First Keg Build Complete!

    Too busy quaffing pints to care... :D
  9. S

    First Keg Build Complete!

    Yes. And the go all way through to the other side so that grip is pretty solid.
  10. S

    First Keg Build Complete!

    Fisher and Paykel P120 - Had to modify the freezer manifold, bending it down against the back wall. Cheers,
  11. S

    First Keg Build Complete!

    Hi Guys, Finally finished my first keg build. Really happy with how it turned out. Couldn't have done it without all the help on this forum so thanks! Still need to mount my temperature controller properly, but otherwise good to go! Cheers!
  12. S

    Pouring My First Beer Tonight!

    A galaxy IPA.
  13. S

    Keg King Jg Fittings

    Yep agreed. They do have some really good stuff. And afaik still one of the cheapest place around to get your CO2 bottle from. But those fittings, my god, haven't managed to get any of them to work yet.
  14. S

    Pouring My First Beer Tonight!

    I pressurised the keg, then disconnected. It's still holding pressure but I'll probably need to do some forced carbonation. Following the method shown in these forums. I think I'll turn the gas off just to be on the safe side (after disconnecting from keg thanks Liam) until I feel comfortable...
  15. S

    Pouring My First Beer Tonight!

    I put down an IPA a few weeks back and have had it stored in the keg under pressure for a week or two. Tonight I'm going to try my first pour. I've had the keg chilling in my newly built kegerator overnight and it's sitting at 4 degrees. (build post to follow :)) I'm going to check carbonation...
  16. S

    Keg King Jg Fittings

    Man, wish I had known all this before I spent the $$$ will avoid kegking from now on. Need a list of reputable suppliers on here, at the least we need a list of products that are known to be good, and ones to avoid. Ah well, learn from them mistakes I guess. BTW - shanks are definitely 7/8...
  17. S

    Keg King Jg Fittings

    Need to replace my crap ones from KegKing, anyone make a 7/8 to 5/16 adaptor for going on the back of a perlick shank? Anyone else have problems with the keg king ones? Mine leak, appear to be wrong diameter, and are a ******* to disconnect. Cheers,
  18. S

    Found A Great Piece Of Kit

    http://www.bunnings.com.au/products_produc...0_P4900028.aspx Nothing special going on here, just a super easy way to do up outer collars for your taps without using a tap spanner. Doesn't scratch the nice chrome surface and also works great on all my hex fittings so far :)
  19. S

    Stc 1000 Temp Controller

    Thanks Nathan, this makes sense to me but just to be on the safe side I'll get one of my electrician friends to wire it up :) Cheers for the help!
  20. S

    Stc 1000 Temp Controller

    Yep. Update, was able to pull this cable loom through the back of the fridge, so that I can run it to the STC-1000 OUTSIDE the fridge :) Turns out back of fridge just has a long length of plustic tubing that the cable all runs through. Thanks for the advice Nathan, ues the same wiring as your...
Back
Top