Search results

As it shows: 1 x fermentor (NOT ported) 1 x SS racking cane with sediment reducer And you get a good length of heavy duty silicone tube to go with it. I'd recommend a new fermentor seal for the sake of it ($3 - ESB / eBay). Pickup only Darlington 2008. $20 Never used for sours. I

As it reads, BRAND NEW keg King MK3 regulator. Excess to my needs, pickup from Darlington 2008. The MK2 is $59.99 on the KK website, I'll do this MK3 one for $55.

As it says, BRAND NEW stainless steel intertaps. Excess to my needs, new home needed! Pickup Darlington 2008. They're $44.99 each at KK suppliers and I'll do them both for $80.00 KK listing: http://kegking.com.au/intertap-ss-tap-only-stainless-steel.html

I've looked around and seen plenty of information on the older nasty cheap kegs without rubber ends on them but little with the newer type. Perhaps i'm just missing the posts entirely or the thread is buried. Does anybody use the KK kegs with rubber ends and recommends them? Or is it worth...

Up for sale is a Keg King series 3 dual tap kegerator. Due to a new little one in my life I've gotta change my equipment setup and this is the latest victim (sob). It's used, and in perfect working condition. Will be cleaned over & wiped down ready to go. There is a sticker on the front which...

It's empty and needs a new home! Condition as per images, bottle stamp image as shown. $50 OBO Immediate pickup available from Darlington NSW 2008.

Due to equipment changeover & a new little one I need to clear additional brewing hardware. 5 X 19L Pinlock kegs. All have modern lids. Some kegs have stickers, some a little ding. Kegs have been in use for around 5 years now. 2 of them give slight pressure leaks, my money is on a sticking...

Needing a new home due to downsizing of home equipment. Never used for sours, hosed out & ready to go. $15 each OBO. Pickup Darlington NSW.

I know many threads exist for mill questions, but I need some help with the below decision / setup ability. I'm going to buy a mill, and would like to mount a motor to it (I considered a hand crank for about 1min). Looking at the monster mill mm2-2.0 as a preference (got the allocated cash, why...

I need to replace the dip tube O-rings on my kegs and the ones I grabbed from a LBS just don't fit despite assurances they would. I've had a look around though find it a bit tricky to find someone with all the parts in stock. Can anybody help me out or know the ID's of the rings? Would love to...

Hello all. I'm looking to get some new fermenters and would like to go with glass carboys. I've used a glass one in the past with a friend, then later a better bottle (which got melted). Looking around for somewhere to buy them from in Sydney. For the most part I can only find 5gal ones, no...

A while ago I was searching for a load rated work table that would do my brewing needs (and thanks to those who gave me some great ideas!), but remain inner city friendly. Well, after a half dozen batches, the Keter table is working a treat. It costs a damn sight more in Australia than in the...

I've been using a very cheap (very, very, cheap) table for brewing with my BM. Being short of space & storage, i don't have the ability to store a rigid table or stand at the moment for brewing with. The outdoor table i don't trust brewing on, and the BM on it's own is too low to work with...

I need to clean out some hops, and am a bit stuck with what to use them for. I've been going through a fair chunk lately with modified recipes etc though many remain. I've got the below, and would love some suggestions on using up a fair whack them... Amarillo - 60g Apollo - 63g Aurora - 51g...

I currently have a better bottle as my only fermenter. Simply, it's not keeping up. Kegs are getting torn apart and i'm having backlog. This must be stopped, more beer must be served. I'm also short on space. Very short. Any additions would need to take up only slightly more room than the BB...

I've had a dig around, over the forums and beersmiths website etc. Has anybody got a solid equipment profile sorted for the 20L system? I want to set up bs2 prior to the system arriving. Had some hope there would be an official equipment profile download but i can't seem to find one. Any help...

I've looked around for a good sized mash paddle, but have come up short of what i would like. I know i could make what i would like, but honestly, i simply don't have the time at the moment. With pref. i would love a paddle as per the link. Something around 90cm total, hardwood, food safe (raw...

Moving to a BM system, i have a 40L concealed element crown urn based BIAB setup. It's inclusive of all the below, pickup ONLY. Newtown, Sydney. Never had boil protection issues. Pics on request. 1 x Concealed element 40L crown urn. Approx 15 brews. Some minor scuff, no dings. Cleaned as...

I'm having some trouble finding somewhere to find a pinlock socket from in AUS. Does anybody know if any HBS in AUS has them readily available? They are cheap in the states ~ $10 or so but, of course, the shipping is a joke. I'd rather buy one, couldn't be bothered making my own. Like the one...

I'm getting married later this year, and i have a few specific things i've been given the OK to. I would LOVE any feedback possible, and any ideas you might in relation to this. Firstly, i would love to have a specific wedding beer for the reception. The venue has given the OK to supplied kegs...