Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. razz

    Mill Motors

    I would happily provide details of my MashMaster grain mill but it's no longer manufactured.
  2. razz

    GUTEN

    Brewing beer is bucket chemistry.
  3. razz

    Motion Dynamics Mill Motor Wiring

    The original MillMaster, I love mine. They don’t make them like that anymore!
  4. razz

    KegLand Questions and Answers

    As compared to lifting the malt pipe with the grain bag inside, was what I meant.
  5. razz

    KegLand Questions and Answers

    I’ve tried with it inside the malt pipe and it was a pain in the backside. I never did try it out side the malt pipe but it would definitely make lifting the malt pipe a lot easier.
  6. razz

    KegLand Questions and Answers

    The stainless unit is about 250 grams so it’s good to keep a piece of silicone tube nice and straight when it’s over the mash. $20ish from AliExpress. Nicely spreads the wort out across the grain if you sit it just at the grain surface. The sergeant spray has a really good pattern (polygon) and...
  7. razz

    Hello from Aberdeen, Scotland

    Welcome PVD. Ask questions, make beer and have fun!
  8. razz

    KegLand Questions and Answers

    My collection of gadgets, I can’t help myself. The stainless piece is the best one for spreading wort back over the grain bed. The red one is a CIP from KL.
  9. razz

    Newbie from Perth, G'day!

    Welcome Snowy, have fun mate.
  10. razz

    2023 - What are you brewing?

    Monday’s RIS Captains Hat RIS Imperial Stout 11.3% / 24.1 °P Recipe by JD All Grain Small Batch brewing 67.1% efficiency Batch Volume: 17 L Boil Time: 120 min Mash Water: 26.45 L Sparge Water: 6.75 L Total Water: 33.2 L Boil Volume: 27.79 L Pre-Boil Gravity: 1.072 Original Gravity: 1.102...
  11. razz

    Hi from Adelaide

    Welcome Rey. baby steps? Some would say tippy toeing through an absolute plethora of information, equipment, ingredients, processes etc. Have fun and ask lots of questions.
  12. razz

    G'day all!

    Good bubby!
  13. razz

    Closed transfer into keg with a coupler

    You need the spunding valve with a carbonated beer so that CO2 doesn’t break out of solution during the transfer. If that happens the keg will have a lot of foam. Generally if your beer is carbonated to approx 50kpa then the spunding valve will be set just below this pressure. I need to correct...
  14. razz

    Closed transfer into keg with a coupler

    It depends on if the beer is already carbonated Henry. If it is flat then follow the procedure you outlined.
  15. razz

    First time kegging, what psi setting?

    Leave it to absorb into the beer.
  16. razz

    First time kegging, what psi setting?

    Generally 30psi would be used for force carbonation Graeme, 24 hours or so. If you are leaving it for 10 days then 8-12 psi will be fine.
  17. razz

    KegLand Questions and Answers

    Thanks for the offer but what I meant was there is no wish list on the new site. There is no heart shaped button in each item like the on the old website.
  18. razz

    KegLand Questions and Answers

    Andly chance of the wish list appearing on the new website please?
Back
Top