Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. H

    Equipment For Sale Monster Mill

    Hi Guys My monster mill and motor all contained inside a cabinet with a hopper is for sale. It’s worked perfectly for years but I’m not brewing much at the moment so needs to go. Fits 10kg in the hopper. Pick up Aspley Brisbane $200 Cheers
  2. H

    FS: Stainless tube 3/8" approx 6-7m

    Hi Guys I have excess 3/8" tube from a heat exchanger I built. Perfect for either a HEX or Counterflow chiller. Pickup Brisbane north. $60 ono Matt
  3. H

    Two Stage Stainless Counter Flow Chiller

    hello brewers, I"ve almost finished my two stage stainless CFC. Tested it this arvo hooked up as one stage chiller on a bucket of 70deg water and the water coming out the exit was about the same temp as the chilling water so early tests show that it works. Next lot of tests will be using a...
  4. H

    Sanke Fermenter Kit

    Hi there, Just thought I'd show what I've been playing with at the moment. I've been fermenting in a 50L sanke keg legally obtained of course as I'm sick of using two plastic fermenter for a 40L batch. First few batches went well but getting the beer out proved tricky. I then purchased a sanke...
  5. H

    Auber Pids And Two Relays

    Hello peoples, I have an auber pid 2352P i think which is the ramp soak etc and it works great and controling different rests etc. At the moment i have it controlling a relay for the element in the separate hex and this works well. Is there any reason i cant use the pid to control two relays at...
  6. H

    Hefeweizen Terminal Gravity

    Hello folks, Just probing for some thoughts on what the final gravity for a hefeweizen should be. bjcp and other guidelines are that it should be around 1.010 to 1.014 where Eric Warner says it should be from 1.015 - 1.020. The batch I just brewed slowed right down at 1.016 so I roused it by...
  7. H

    Moster Mill Setup

    All this talk of mill motors and I just finished setting up mine in an old cupboard. The Lid goes back ontop so to use as work bench. Stole the idea from another thread and it works quite well.
  8. H

    Fs: Glass 23l Fermenter

    Hi folks, Not using this anymore so I've cleaned her up ready for sale. $40 Pm if interested pick up only brisbane
  9. H

    Ammonia

    Hello peoples, Reading up on some water filtration options yesterday and for Brisbane and Sydney water that is treated with chloramine when you filter it with a carbon block filter you remove the chlorine but free up the amonia in your water. On most brews I have made I end up with a very...
  10. H

    Ex Coffee Bag As Hop Bag

    Hi folks, A question on hop bags. I drink a fair bit of premium fresh roasted coffee and am collecting a few of the silver coffee bags. They have what looks to be a one way valve on the bag to let gas out of the bag so that the coffee can degas. Wouldthesebe suitable for storing hops in them in...
  11. H

    What To Do With High Fg?

    Hi folks, Just did the maiden brew on my new herms system and made 50Ls of american amber ale hopped with cascade simcoe. I used BBpale malt some munich and some crystal and choc malt. The planned OG was 1.048 and I ended up with 1.052. When I mashed in I didn't take into account the extra heat...
  12. H

    Sanitary Fittings

    Got a few parts back from my welder and some of the electrics for my brewery upgrade. He showed me some pics of the kettles etc and they look good. enjoy
  13. H

    What Ssr?

    Hello people, Just a question on SSRs. I'm ordering a Auber Pid 2362 to control a 3600W element and a Auber Pid 2352 ramp/soak to control a 2400w element and wanting to know what SSRs to buy. Will the 25A ssr be ok or should I be getting the 40A. I have a 15A circuit at home and all work s...
  14. H

    Starter Wort

    Hello folks, A question on yeast starters, I normally use boiled dme for starters but have recently been saving some wort from prior batch and keeping in the freezer then using that to grow up yeast. I just had a batch go bad in the keg after racking that tastes of a wild yeast infection. I...
  15. H

    Show Us You Glass Ware Collection

    Just organised my glass ware cupboard so I took few pics with my new camera. I'm getting quite a stash of bitburger glasses..
  16. H

    Polyclar After Gassed Up

    Hi Folks, Made a German Pilsner a month a go and in the last week of fermenting it tasted very similiar to bitburger but when I racked to keg to lager ( one week Later) it had lost most of it's flavour. I decided to dry hop with 15g of hallertau pellets for a week. I then filtered but forgot to...
  17. H

    Stainless Cone

    Hello brewers, Just wanting to turn a spare keg body 50L into a SS conical. I'm trying to source somewhere that can make me up a ss cone with a half inch hole in the bottom for a socket and valve. Has anyone done this or can point me in the direction of someone that could. Any info would be...
  18. H

    Ss Threaded Pipe

    Hi folks, A stupid question but I'll ask anyway just in case, I have some SS BSP threaded 1/2" pipe that is too long and want to cut it half. Is this as simple as cutting it with and angle grinder or will it stuff up the thread so it will be unusable. Any tips would be great.. hockadaisy
  19. H

    50l Fermenters

    Hi guys/girls, Just wondering if anyone has come across any fermenters between the sizes of 30L and 60L, I'm trying to maximize my capacity in my upright freezer and the 60L fermenter is just a little too wide.. hockadays
  20. H

    Iced Keg

    Hi folks Just had a strange experience, Gradually over a few weeks I noticed my Boh pils turn hoppier and hoppier to the point where it was way to much saaz flavour. I also noticed it tasted like a hot alcohol taste that kept getting worse. I decided to ditch it as it was now tasting a bit...
Back
Top