• We have implemented the ability to gift someone a Supporting Membership now! When you access the Upgrade page there is now a 'Gift' button. Once you click that you can enter a username to gift an account Upgrade to. Great way to help support this forum plus give some kudos to anyone who has helped you.

Search results

Aussie Home Brewer

Help Support Aussie Home Brewer:

  1. Danielxan

    Matho's controller

    As you read the color code, 0 ohm, are the bridges
  2. Danielxan

    Matho's controller

    The Birraduino are designed to work in conjunction with the firmware written by Niki77 forum arduino. http://forum.arduino.cc/index.php?topic=176121.0 Currently the firmware is still in beta. SVN reposiroty user : guest password : guest http://niki77.dyndns.org/svn/BrauDuino_ITA/trunk/ In...
  3. Danielxan

    Matho's controller

    Revision 2 of PCBs Birraduino, to solve a serious problem due to the SPI libraries, that prevent the full use of the D10 as an output pin instead of SS. Adding polarity selection BackLigjt
  4. Danielxan

    Matho's controller

    I removed the old pcb, which have been replaced. PCBs with name Brauduino support the original firmware.
  5. Danielxan

    Matho's controller

    Tthe project has evolved into a new hw. The fw has been rewritten almost completely Supports SD card for import and export recipes The system log. Display I2C and RTC Auxiliary outputs Import recipes from BrewPlus etc.. Will be released when ready Maybe will have to migrate to another AVR...
  6. Danielxan

    Matho's controller

    This is the last variation, not yet tested. The software is being developed, tested appeda all, will be issued. For the two pumps and two heaters, as you can see at the moment we have exhausted the pins dell'arduino.
  7. Danielxan

    Matho's controller

    And the new latest release, Support for new display 20x4. Socket for SD card reader. I2c connector for RTC and expansion. Digital Pwm pin for heater. After the tests will be issued the master.
  8. Danielxan

    Matho's controller

    Two versions of the same PCB, One with the socket SD card and one with the connector for the external SD module. If someone wants to test the master and I can post the list of components
  9. Danielxan

    Matho's controller

    My level of programming is quite poor. I guess now that the hardware is defined, with the help of a programmer be able to do what you want In any case there are still some changes to the pcb
  10. Danielxan

    Matho's controller

    Good evening everyone, I'm the pcb designer. A new release. I had to remap some pins. Two cards in one pcb Eurocard format 100x160 mm. New LCD display 4 lines of 20 columns Backlight on / off controlled by software Connector for SD card on board.
Top