Search results

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

  1. W

    KegLand Questions and Answers

    @KegLand-com-au - My Blowtie 2 spunding valve (KL15042) isn't holding pressure. I've disasembled a couple of times, replaced the short length of tubing + disconnects used and it will still slowly release pressure. Do you have any tips to troubleshoot or remedy? Cheers!
  2. W

    KegLand Questions and Answers

    Is the 20th September date on the site accurate for the non-FC units? Any chance of a 10+ discount? I'd be keen to replace the majority of my DC's with these.
  3. W

    KegLand Questions and Answers

    Sorry wrong link, I was meaning this sort of thing: Spectrum | BarthHaas
  4. W

    KegLand Questions and Answers

    @KegLand-com-au - have you ever investigated liquid hop products? Such as this one? LUPOMAX® | HAAS®
  5. W

    KegLand Questions and Answers

    Or even cheaper and simpler, buy one of these, Yellow Plastic Carbonation & Line Cleaning Cap & FermZilla Pressure Cap remove the poppet and spring and put tubing over the end.
  6. W

    KegLand Questions and Answers

    You could use one of these on the PCO threads: PCO1881 x 3/4, from there you could use a 3/4 thread to 13mm barb and run that as your blow off. Might be an expensive solution though. If that ends up being too tall, you could use one of these to have it exit to the side: PCO 1881 Carbonation Cap...
  7. W

    KegLand Questions and Answers

    @KegLand-com-au, any availabilty updates on the Duotight ball lock disconnects? (i.e. KL20749 or KL20756). How about the FC variants?
  8. W

    KegLand Questions and Answers

    Hey @KegLand-com-au any dimensions and/or renders of the 2.8L keg?
  9. W

    KegLand Questions and Answers

    Hey @KegLand-com-au, also excited to use some Eclipse over summer, any update on your availability? Or any chance you can give us a heads up in here once they're going up on the site?
  10. W

    KegLand Questions and Answers

    Thanks very much, I'll keep an eye out! Very interesting I never considered longevity in PET outside of fermentation purposes. I agree, I much rather using my Fermzilla all rounder vs the original fermentasaurus as I can clean by hand and fish out my TILT before ditching trub (and i always...
  11. W

    MAshmaster Minimill - Knurled

    Hey mate any idea how much postage would be to Fairfield 3078?
  12. W

    KegLand Questions and Answers

    Hey @KegLand-com-au first of all thanks for keeping us all occupied here in Vic! Apologies if it's been asked before, but have you ever considered creating a PET Corny Keg (or at least a similar vessel with the same outer dimensions?). Something like Keg King's 'Fermenter King Jr' but in...
  13. W

    Grain Mill with motor 2 roller VGC optional power pak

    Hi Mate, I'd be keen for pickup depending on location?
Top